[r...@esx2 root]# ps -lf -C cimserver F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY TIME CMD 0 S root 1991 1984 99 75 0 - 80493 schedu Apr07 ? 3-11:31:10 /var/pegasus/bin/cimserver daemon=false
Kurt On Thu, Apr 8, 2010 at 13:55, Klint Price <[email protected]> wrote: > Can you run this command and tell me what the results are: > > ps -lf -C cimserver > > > > -----Original Message----- > From: Kurt Buff [mailto:[email protected]] > Sent: Thursday, April 08, 2010 1:49 PM > To: NT System Admin Issues > Subject: Re: OTish: ESX 3.5 guest won't boot > > It's a Dell 2950, with a pair of 500gb SATA drives in a RAID1 array. > > According to the Dell site it's a > > CR679 Assembly, Card, SAS6IR, Integrated, Sled > > Kurt > > On Thu, Apr 8, 2010 at 13:36, Klint Price <[email protected]> wrote: >> What model controller is this disk attached to? Disk type? Server model? >> >> -----Original Message----- >> From: Kurt Buff [mailto:[email protected]] >> Sent: Thursday, April 08, 2010 1:34 PM >> To: NT System Admin Issues >> Subject: Re: OTish: ESX 3.5 guest won't boot >> >> Yuck: >> >> [r...@zesx2 root]# vmkfstools -P /vmfs/volumes/esx2\:storage1/sus/sus.vmdk >> Could not get volume attributes (rv -1) >> Error: Connection timed out >> >> On Thu, Apr 8, 2010 at 13:28, Damien Solodow >> <[email protected]> wrote: >>> That's a positive sign. >>> Try this: "vmkfstools -P /vmfs/volumes/esx2\:storage1\sus\sus.vmdk" >>> This will query the disk information. >>> >>> -----Original Message----- >>> From: Kurt Buff [mailto:[email protected]] >>> Sent: Thursday, April 08, 2010 4:14 PM >>> To: NT System Admin Issues >>> Subject: Re: OTish: ESX 3.5 guest won't boot >>> >>> [r...@esx2 root]# vmware-cmd /vmfs/volumes/esx2\:storage1/sus/sus.vmx >>> getstate >>> getstate() = off >>> >>> Kurt >>> >>> On Thu, Apr 8, 2010 at 13:10, Damien Solodow <[email protected]> >>> wrote: >>>> From the ESX host run "vmware-cmd /vmfs/volumes/VOLNAME/VMNAME/VMNAME.vmx >>>> getstate" and reply with the result. >>>> >>>> -----Original Message----- >>>> From: Kurt Buff [mailto:[email protected]] >>>> Sent: Thursday, April 08, 2010 4:03 PM >>>> To: NT System Admin Issues >>>> Subject: Re: OTish: ESX 3.5 guest won't boot >>>> >>>> Some are on the SAN, some are direct attached, I haven't seen issues with >>>> any of the other VMs yet. >>>> >>>> Kurt >>>> >>>> On Thu, Apr 8, 2010 at 12:57, Damien Solodow <[email protected]> >>>> wrote: >>>>> Do you have other guests on the same storage as the misbehaving guest? >>>>> Are they working ok? >>>>> >>>>> -----Original Message----- >>>>> From: Kurt Buff [mailto:[email protected]] >>>>> Sent: Thursday, April 08, 2010 3:54 PM >>>>> To: NT System Admin Issues >>>>> Subject: OTish: ESX 3.5 guest won't boot >>>>> >>>>> I'm googling like mad, and not finding a lot. Our ESX infrastructure >>>>> is primitive - it's two purely standard (not enterprise, so no >>>>> vmotion, etc.) ESX boxes running a number of guests, some of which >>>>> are on a SAN, some of which are on direct attached (internal) disk. >>>>> >>>>> ESX is Version 3.5.0 Build 133630 - the VI client is 2.5.0 103672 >>>>> >>>>> The guest that's misbehaving is our Win2k3 R2 SP2 WSUS server (also >>>>> running our VIPRE enterprise console), and it's on direct attached >>>>> disk. It started hanging, so I initiated a shutdown. After 15 minutes >>>>> at the 'shutting down' dialog box without any movement, I asked ESX >>>>> to power the box down. >>>>> >>>>> I then tried to start it, and got a popup from the VI client saying >>>>> >>>>> Error: Could not power on VM : Metadata write error. Failed >>>>> to power on VM. >>>>> >>>>> I also tried starting it from the command line, and got the following >>>>> error: >>>>> >>>>> VMControl error -999: Unknown error: The poweron operation >>>>> failed unexpectedly. >>>>> >>>>> The ESX host contains a number of production machines, so I can't >>>>> simply reboot in the middle of the day. >>>>> >>>>> I've cruised through /var/log/messages, and found messages like this: >>>>> >>>>> Apr 7 15:16:35 zesx2 cimserver: storelib-Failed to get pd infor for >>>>> ctrl 0, dev 1 Apr 7 15:16:35 zesx2 cimserver: Cannot get information >>>>> from controller 0 phy device 1 Apr 7 21:03:01 zesx2 cimserver: >>>>> storelib-GetLDList-ProcessLibCommandCall failed; rval = 0x8017 Apr 7 >>>>> 21:03:01 zesx2 cimserver: Volume Cannot get logical disk data from >>>>> controller 0 Apr 7 21:03:01 zesx2 cimserver: storelib-Failed to get >>>>> pd infor for ctrl 0, dev 1 Apr 7 21:03:01 zesx2 cimserver: Cannot >>>>> get information from controller 0 phy device 1 Apr 7 21:03:01 zesx2 >>>>> cimserver: storelib-Failed to get pd infor for ctrl 0, dev 2 Apr 7 >>>>> 21:03:01 zesx2 cimserver: Cannot get information from controller 0 >>>>> phy device 2 Apr 8 07:03:00 zesx2 cimserver: storelib-Read config >>>>> failed >>>>> 0 Apr 8 07:03:00 zesx2 cimserver: Cannot get information from >>>>> controller 0 phy device 2 Apr 8 07:03:00 zesx2 cimserver: >>>>> storelib-Failed to get pd infor for ctrl 0, dev 1 Apr 8 07:03:00 >>>>> zesx2 cimserver: Cannot get information from controller 0 phy device >>>>> 1 Apr 8 11:22:04 zesx2 cimserver: storelib-Failed to get pd infor >>>>> for ctrl 0, dev 0 Apr 8 11:22:04 zesx2 cimserver: Cannot get >>>>> information from controller 0 logical device 0 Apr 8 11:22:04 zesx2 >>>>> cimserver: >>>>> storelib-Failed to get pd infor for ctrl 0, dev 2 Apr 8 11:22:04 >>>>> zesx2 cimserver: Cannot get information from controller 0 phy device >>>>> 2 Apr 8 11:22:04 zesx2 cimserver: storelib-Failed to get pd infor >>>>> for ctrl 0, dev 1 Apr 8 11:22:04 zesx2 cimserver: Cannot get >>>>> information from controller 0 phy device 1 Apr 8 11:22:04 zesx2 >>>>> cimserver: >>>>> storelib-Failed to get pd infor for ctrl 0, dev 2 Apr 8 11:22:04 >>>>> zesx2 cimserver: Cannot get information from controller 0 phy device >>>>> 2 >>>>> >>>>> Any thoughts and pointers much appreciated. >>>>> >>>>> Thanks, >>>>> >>>>> Kurt >>>>> >>>>> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ >>>>> <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ >>>>> >>>>> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ >>>>> <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ >>>> >>>> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ >>>> <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ >>>> >>>> >>>> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ >>>> <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ >>> >>> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ >>> <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ >>> >>> >>> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ >>> ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ >> >> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ >> ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ >> >> >> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ >> ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
