This will have to wait until tomorrow evening. That should put it outside of our overseas offices' workweeks, and get folks to go home early here as well.
The downside is that I had other maintenance on a couple of the servers on this box tomorrow night as well, with a tight schedule to beat the start of the weekly full backups. Ah, well. I knew the job was dangerous when I took it. I'll let you know how it goes. Kurt On Thu, Apr 8, 2010 at 15:39, Klint Price <[email protected]> wrote: > Remember to power off all guests, and put in maintenance mode in case you > need to reboot several times. You may also want to shut off auto power-on so > you can bring them back online one at a time. > > -----Original Message----- > From: Klint Price [mailto:[email protected]] > Sent: Thursday, April 08, 2010 3:38 PM > To: NT System Admin Issues > Subject: RE: OTish: ESX 3.5 guest won't boot > > Ok, a 2950 has dual core Xeons. Don't worry about the 90% on Proc 0 as your > average load is coming in around 60%. > > Let me know the results of your reboot process. > > -----Original Message----- > From: Kurt Buff [mailto:[email protected]] > Sent: Thursday, April 08, 2010 3:24 PM > To: NT System Admin Issues > Subject: Re: OTish: ESX 3.5 guest won't boot > > Dual proc, dual core. > > Proc 0 = 90.72% avg > Proc 1 = 50.18% avg > Proc 2 = 49.49% avg > Proc 4 = 49.74% avg > > Total is 59.74% avg > > But it's been higher than that all the time I've been troubleshooting > this problem. > > Kurt > > On Thu, Apr 8, 2010 at 15:12, Klint Price <[email protected]> wrote: >> 90% utilization after downing two servers? Is that 90% on a single core, or >> 90% total? >> >> How many other VMs do you have on the LUN(s) that are still powered on? Any >> more than the two referenced below? >> >> What is the output / top CPU utilization pct for the processes found by >> running: >> >> #top (from SSH) >> >> (exit with CTRL-C) >> >> >> >> -----Original Message----- >> From: Kurt Buff [mailto:[email protected]] >> Sent: Thursday, April 08, 2010 3:04 PM >> To: NT System Admin Issues >> Subject: Re: OTish: ESX 3.5 guest won't boot >> >> In line... >> >> On Thu, Apr 8, 2010 at 14:40, Klint Price <[email protected]> wrote: >>> 1) I wouldn't expect a power on to work until you can get this command to >>> work: >>> >>> vmkfstools -P /vmfs/volumes/esx2\:storage1/sus/sus.vmdk >>> >>> The host needs to be able to read from the disk. >> >> Reasonable. >> >>> 2) Do you have an additional non-production server on the same LUN that can >>> be powered off, with an attempt to restart your current down server? >>> Result? >>> Will the 2nd non-production server power back on? >> >> Yes. It's acting in a similar way - I logged in, and it shut down >> fine, but it won't power up now. Nor will a machine that I had powered >> >>> 3) All things DR considered, can you schedule a reboot tonight? If so, you >>> may >>> want to consider re-seating the HBA and drives, clear dust (which can cause >>> cards >>> to overheat), and reboot. >> >> Gotcha. >> >> One last thing for the moment: I've been looking at the performance >> chart for this box, and see that CPU utilization is hovering around >> 90%. I've got one VM that seems pretty far out of line from its normal >> CPU utilization (our Win2k TS server), and another that's a bit higher >> than normal (our Win2k3 file/print server). >> >> I'm thinking of kicking the one person using the TS server off and >> rebooting, and seeing what that does to the situation, before downing >> the other machine. >> >> Kurt >> >> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ >> ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ >> >> >> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ >> ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
