Thanks!

(By the way, nobody has yet asked, but the server in quesion is running 
Windows 2003, SP2)

I just checked...  Each NIC has TCP/IP unchecked, and BASP (Broadcom 
Advanced Server Program Driver) checked.

Also in that control panel, there is the BASP Virtual Adapter.  In "Status 
- Network Connection Details", it shows the "correct" IP address 
(10.1.2.47 and in the data VLAN).  Also for the team, it shows the MAC 
address of the "offending" NIC.

The Broadcom "Advanced Control Suite" shows nothing inconsistant between 
the two NICs.

The Dell OpenManage Server Administrator, however, shows "IP Address 
10.1.2.47" "belonging" to the NIC _not_ sending gratuitous ARP requests.

The "IP Address [Not Obtained]" entry has the "offending" NIC in it.

Don't know if what shows in the Dell OpenManage thingie is significant or 
not.

Thanks again...
--
richard

"Webster" <[email protected]> wrote on 08/24/2010 10:22:39 AM:

> Are you sure that after updating the driver the NIC team is still in
> place?  Having a dual homed Citrix server is a recipe for trouble.  
> Dual homed Citrix servers are supported only in very specific 
> configurations and is not a Citrix recommended practice.  NIC 
> teaming is fine, dual homing as separate NICs is not.
> 
> 
> Carl Webster
> Citrix Technology Professional
> http://dabcc.com/Webster
> 
> 
> 
> From: [email protected] [mailto:[email protected]] 
> Sent: Tuesday, August 24, 2010 9:52 AM
> To: NT System Admin Issues
> Subject: RE: What IP has this MAC?
> 
> 
> Bing in over my head, I must confess to not knowing Cisco IOS.  I 
> did find the MAC address in the Cisco Network Assasin.  This will 
> help in the future... 
> 
> Now, this brings up Problem #2: 
> 
> The machine in question is a Dell PE-1950 Citrix server.  It has two
> NICs.  When the server was built, only one of the NICs was used. 
> Later, the Broadcom software was downloaded and installed, and the 
> two NICs were teamed for fail-over redundency. 
> 
> Both the Cisco Network Assasin and the "ping / arp -a" show that 
> this NIC has the IP address "10.1.2.47".  It is a static IP address 
> and is in our DATA VLAN. 
> 
> Wireshark shows that this NIC is sending gratuitous ARP packets and 
> is claiming the address "10.1.20.45" (DHCP and in the VOICE VLAN). 
> 
> Any hints on how to make a (Dell/Broadcom) NIC stop sending 
> gratuitious ARP packets? 
> 
> Thanks again... 
> -- 
> richard 
> 
> "Jim Holmgren" <[email protected]> wrote on 08/24/2010 09:21:02 AM:
> 
> > Think lower-level.  Find the MAC address on your switch, get the 
> > port that it is plugged into  and follow it from there. 
> > 
> > 
> > Jim Holmgren 
> > Manager of Server Engineering 
> > XLHealth Corporation 
> > The Warehouse at Camden Yards 
> > 351 West Camden Street, Suite 100 
> > Baltimore, MD 21201 
> > 410.625.2200 (main) 
> > 443.524.8573 (direct) 
> > 443-506.2400 (cell) 
> > www.xlhealth.com 
> > 
> > 
> > 
> > From: [email protected] [mailto:[email protected]] 
> > Sent: Tuesday, August 24, 2010 10:17 AM
> > To: NT System Admin Issues
> > Subject: What IP has this MAC? 
> > 
> > 
> > Greetings! 
> > 
> > I am experiencing a bit of a network problem with, at the moment, is
> > more of an annoyance (but could easily get bigger!).  Somewhere I 
> > have a NIC spewing out gratuitious ARP packets.  (I did eventually 
> > hunt it down, but for the future...) 
> > 
> > Using Wireshark, I have the MAC address of the offending NIC. 
> > Again, for the future, is there a ping command switch or something 
> > else which will enable me to enter the MAC address and have the 
IPreturned? 
> > 
> > Wireshark does indicate the offender is a Dell system.  However, 
> > being mostly a Dell shop, pinging each node here and then examining 
> > my ARP cache is rather slow... 
> > 
> > Thanks!
> > -- 
> > Richard D. McClary 
> > Systems Administrator, Information Technology Group 
> > ASPCA® 
> > 1717 S. Philo Rd, Ste 36 
> > Urbana, IL  61802 
> > 
> > [email protected] 
> > 
> > P: 217-337-9761 
> > C: 217-417-1182 
> > F: 217-337-9761 
> > www.aspca.org 
> > 
> > The information contained in this e-mail, and any attachments 
> > hereto, is from The American Society for the Prevention of Cruelty
> to Animals®
> > (ASPCA®) and is intended only for use by the addressee(s) named 
> > herein and may contain legally privileged and/or confidential 
> > information. If you are not the intended recipient of this e-mail, 
> > you are hereby notified that any dissemination, distribution, 
> > copying or use of the contents of this e-mail, and any attachments 
> > hereto, is strictly prohibited. If you have received this e-mail in 
> > error, please immediately notify me by reply email and permanently 
> > delete the original and any copy of this e-mail and any printout 
thereof. 
> > 
> > 
> > 
> > 
> > 
> > 
> > CONFIDENTIALITY NOTICE: This email, including attachments, is for 
> > the sole use of the intended recipient(s) and may contain 
> > confidential and/or protected health information. Under the Federal 
> > Law (HIPAA), the intended recipient is obligated to keep this 
> > information secure and confidential. Any disclosure to third parties
> > without authorization from the member of as permitted by law is 
> > prohibited and punishable under Federal Law. If you are not the 
> > intended recipient, please contact the sender by reply e-mail and 
> > destroy all copies of the original message. 
> > 
> > NOTA DE CONFIDENCIALIDAD: Este mensaje incluyendo cualquier anejo es
> > para uso exclusivo del (los) destinatario (s) y puede incluir 
> > información confidencial y/o información de salud protegida. La Ley 
> > Federal (HIPAA) establece que el destinatario está obligado a 
> > mantener la información confidencial y sequra. HIPAA prohíbe y 
> > castiga cualquier divulgación a terceras personas sin autorización 
> > del afiliado o permitido por ley. Si usted no es el destinatario, 
> > redirija esta mensaje al remitente, y destruye cualquier copia 
> > existente del mensaje original. 
> 
> 
> 
> 
~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

Reply via email to