That makes sense, ServerB is an old Pentium III.

From: Kennedy, Jim [mailto:[email protected]]
Sent: Tuesday, November 16, 2010 9:33 AM
To: NT System Admin Issues
Subject: RE: ..and now for something completely different..

ServerA was faster at answering than the Linksys router. The Linksys router is 
faster at answering than ServerB.

From: David Lum [mailto:[email protected]]
Sent: Tuesday, November 16, 2010 12:29 PM
To: NT System Admin Issues
Subject: ..and now for something completely different..

Small network, subnet is 25-bit. Been fine for years, no recent changes, except 
as described below.

ServerA: 2003 R2 is a DHCP server (also DC, DNS, file/print etc). ServerA sits 
on hardware that will get flatted and 2008 R2 on it, so  I stand up ServerB, 
again with 2003 R2. I make it a DHCP server, same scope and settings, authorize 
it, etc. Network was fine with this thing forever.

I turn off DHCP of Server A so clients will start getting IP's from Server B 
and it works. Sometimes. Other times clients get an IP from 192.168.1.1. Some 
troubleshooting finds a Linksys router that I had totally forgot about using in 
just "switch" mode. WAN side unused, just the 5 port switch side utilizes (I 
don't even remember doing it, but I am the only guy who does IT stuff at this 
place, and in hindsight I can't believe this hadn't been only a temp solution). 
I bought a proper switch and solved the issue.

My curiosity is why wasn't it an issue when ServerA was the DHCP server? The 
DHCP lease was set for 8 days on ServerA so it's not like in the last several 
months the PC's hadn't been doing DHCPDISCOVER several times...
David Lum // SYSTEMS ENGINEER
NORTHWEST EVALUATION ASSOCIATION
(Desk) 971.222.1025 // (Cell) 503.267.9764


~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
[email protected]<mailto:[email protected]>
with the body: unsubscribe ntsysadmin

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
[email protected]<mailto:[email protected]>
with the body: unsubscribe ntsysadmin

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to [email protected]
with the body: unsubscribe ntsysadmin

Reply via email to