On Sat, Jan 15, 2011 at 10:41, Michael B. Smith <[email protected]> wrote:
> It's been a really really long time for me, but shouldn't the "ip
> default-gateway" be an IP address on the BVI1 subnet?
That seems to help somewhat.
I updated as shown below, with the following results:
- Another WAP on the same PoE switch as the WAP I'm configuring
(all WAPs are on the 115 vlan but on different switches) can ping and
telnet to 15.31 and to 15.1 and 99.1, but not to 99.121 - 15.1 and
99.1 are the addresses of the layer 3 switch.
- A laptop wirelessly associated with 15.31 can ping the router
address on the 99 and 115 vlans, but not WAP's addresses of 99.121and
15.31. The laptop gets 'destination host unreachable for the 99
address of the WAP, and alternating sequences of that and 'reply timed
out' for the 15 address of the WAP (I've got four 'ping -t' prompts
running on the laptop.)
- No longer see on the WAP
"% Unrecognized host or address, or protocol not running."
when trying to ping from this WAP, nor the log errors
" %IP_SNMP-3-SOCKET: can't open UDP socket"
" Unable to open socket on port 161"
- The WAP can ping itself on both addresses, and can ping the
gateway on the 115 vlan (15.1), but not the gateway on the 99 vlan
(99.1.)
I also tried the config below except that I removed the 15.31 address
from it entirely, and while the laptop remained associated and had the
same access, I lost contact with the WAP, and the 99.121 address
didn't come alive.
Kurt
----------Begin updated conf snippet----------
interface FastEthernet0.99
encapsulation dot1Q 99
no ip route-cache
bridge-group 99
no bridge-group 99 source-learning
bridge-group 99 spanning-disabled
!
interface FastEthernet0.115
encapsulation dot1Q 115
ip address 192.168.15.31 255.255.255.0
no ip route-cache
bridge-group 115
no bridge-group 115 source-learning
bridge-group 115 spanning-disabled
!
interface BVI1
ip address 192.168.99.121 255.255.255.0
no ip route-cache
!
ip default-gateway 192.168.99.1
----------End updated conf snippet----------
~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
---
To manage subscriptions click here:
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to [email protected]
with the body: unsubscribe ntsysadmin
