We supply a lot of generic laptop adaptors and have never had any problems. 
Usually the supplied adaptor is manufactured by the same company as the 
original part. The cost is usually about 50% of the own brand and the warranty 
is just as good.



If you take a look at the part code it often tells you all you need i.e. Li 
Shin International 022C2040 is a 20V 40W netbook adaptor - used in an acer 
netbook.



Now to just find one that pets don't like the taste of.



Mike


From: Steven M. Caesare [mailto:[email protected]]
Sent: 25 February 2011 18:22
To: NT System Admin Issues
Subject: RE: QUICK question... A/C adapters

Typo.. should be: "... is what will determine..."

-sc

From: Steven M. Caesare [mailto:[email protected]]
Sent: Friday, February 25, 2011 1:20 PM
To: NT System Admin Issues
Subject: RE: QUICK question... A/C adapters

No, Ben is correct here.

The resistive load (simplifying, as most modern load have inductive or 
capacitive components in addition to purely resistive loads), is heat will 
determine how much he current draw will be.

Ohms law tells us I = V/R

I-current
V=voltage
R=resistance

Therefore if your supply voltage(V) is 14 volts, and the load resistance(R) is 
7 ohms, then the current draw (I) will be 2 amps.

Thus your power supply must be capable of supplying at LEAST 2 amps[1], it may 
be able to  supply more, but the system would simply never draw it. A 500A 
power supply would no more require the load to "dissipate more heat"  it than a 
2A power supply would.

-sc

[1] And incidentally, power (W) = V*A. Therefore our theoretical power supply 
in this case would be supply  28W of power[2]. I not this because power 
supplies are often capable of varying voltage and/or are rated in watts.
[2] Ignoring power efficiency factors for the moment.

From: Jonathan Link [mailto:[email protected]]
Sent: Friday, February 25, 2011 1:07 PM
To: NT System Admin Issues
Subject: Re: QUICK question... A/C adapters

It would depend on whether you can trust the resistor to dissapate the extra 
heat generated by additional current.  It's not something I would do over the 
long term...


On Fri, Feb 25, 2011 at 12:57 PM, Jim Holmgren 
<[email protected]<mailto:[email protected]>> wrote:
Matt,
I believe you are correct.  Also not an EE, but in about 10 years of
working for RadioShack, that was the mantra.

The device will only draw the amperage it needs, but it must have the
correct voltage.

Jim


Jim Holmgren
Senior Manager, Infrastructure Services
XLHealth Corporation
The Warehouse at Camden Yards
351 West Camden Street, Suite 100
Baltimore, MD 21201
410.625.2200 (main)
443.524.8573 (direct)
443-506.2400 (cell)
www.xlhealth.com<http://www.xlhealth.com/>




-----Original Message-----
From: Matthew W. Ross 
[mailto:[email protected]<mailto:[email protected]>]
Sent: Friday, February 25, 2011 12:49 PM
To: NT System Admin Issues
Subject: RE: QUICK question... A/C adapters

I am not an electrical engineer, so please do not take this as power
supply advice:

I have been told that as long as the voltage is correct, you can go over
on the amperage with your PS. So, if you have something that requires
9V, 1 amp PS, and you have a 9 volt, 2 amp... you're good to go. The
device will only pull as much amperage as it requires.

Voltage is specific, as I'm told. Don't mess with it. AC and DC don't
mix, etc, etc...

Again, don't use this as any kind of real advice. Somebody with real
electrical engineering experience can verify or tell me I've been told
wrong. Sm:)e.


--Matt Ross
Ephrata School District


----- Original Message -----
From: Maglinger, Paul
[mailto:[email protected]<mailto:[email protected]>]
To: NT System Admin Issues
[mailto:[email protected]<mailto:[email protected]>]
Sent: Fri, 25 Feb 2011
09:32:57 -0800
Subject: RE: QUICK question... A/C adapters


> I go with 3rd party when there is a significant cost savings.  Case in
> point, we use a particular print server.  The power supplies are
> notorious for going bad.  We cannot purchase the OEM power supplies
> alone and the entire package runs about $120.  I found replacement
power
> supplies for $7.50 online.  Just make sure that the voltage, current,
> polarity, and the connector size all match up!
>
> I have been known to go slightly higher in the current capacity so
they
> don't run as hot.  Note that I said "slightly".
>
> -Paul
>
> -----Original Message-----
> From: John Aldrich 
> [mailto:[email protected]<mailto:[email protected]>]
> Sent: Friday, February 25, 2011 11:27 AM
> To: NT System Admin Issues
> Subject: RE: QUICK question... A/C adapters
>
> Thanks guys... I'll keep monitoring, although it sounds like the
> consensus
> of opinion so far is that 3rd party is OK. :-)
>
>
>
>
> -----Original Message-----
> From: Matthew W. Ross 
> [mailto:[email protected]<mailto:[email protected]>]
> Sent: Friday, February 25, 2011 12:10 PM
> To: NT System Admin Issues
> Subject: RE: QUICK question... A/C adapters
>
> *grabbs the "Dell" AC adapter under his desk and checks who actually
> manufactured it.*
>
> It appears that Dell doesn't make their own, this one is made by
Delta.
> (A
> well known PS manufacturer.)
>
> I'm sure Dell has some very specific requirements for their power
> supplies.
>
> But, I will say that any reputable aftermarket PSs are likely trying
to
> be
> as close to the specs as possible for the intended use. YMMV.
>
>
> --Matt Ross
> Ephrata School District
>
>
> ----- Original Message -----
> From: Ames Matthew B
> [mailto:[email protected]<mailto:[email protected]>]
> To: NT System Admin Issues
> [mailto:[email protected]<mailto:[email protected]>]
> Sent: Fri, 25 Feb 2011
> 08:59:07 -0800
> Subject: RE: QUICK question... A/C adapters
>
>
> > Personally I would get a proper one direct from the manufacturer.
You
> > hardly want a cheapo PSU bein left on and causing a fire.
> >
> > Pretty sure that Dell a good few years ago did a recall for a dodgy
> > batch of laptop PSU (at least in the UK), I doubt you would get that
> > sort of service from an Amazon seller.
> >
> >
> > -----Original Message-----
> > From: John Aldrich 
> > [mailto:[email protected]<mailto:[email protected]>]
> > Sent: 25 February 2011 16:47
> > To: NT System Admin Issues
> > Subject: QUICK question... A/C adapters
> >
> > Are A/C adapters something you guys would ONLY buy from the OEM or
is
> an
> > aftermarket OK on something like that? I got the OEM to come down
> about
> > $10, but they're still about $10 higher than Amazon... if you guys
> think
> > that's something that should come from the OEM, I'll go with them.
> I'll
> > look for your answers until Monday and make a decision based on the
> > consensus of opinion then. :-) (See... I can be patient. :-))
> >
> >
> >
> >
> >
> >
> > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~
> > <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~
> >
> > ---
> > To manage subscriptions click here:
> > http://lyris.sunbelt-software.com/read/my_forums/
> > or send an email to 
> > [email protected]<mailto:[email protected]>
> > with the body: unsubscribe ntsysadmin
> > This email and any attachments to it may be confidential and are
> > intended solely for the use of the individual to whom it is
> > addressed. If you are not the intended recipient of this email,
> > you must neither take any action based upon its contents, nor
> > copy or show it to anyone. Please contact the sender if you
> > believe you have received this email in error. QinetiQ may
> > monitor email traffic data and also the content of email for
> > the purposes of security. QinetiQ Limited (Registered in England
> > & Wales: Company Number: 3796233) Registered office: 85
> > Buckingham Gate, London SW1E 6PD 
> > http://www.qinetiq.com<http://www.qinetiq.com/>.
> >
> > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~
> > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~
> >
> > ---
> > To manage subscriptions click here:
> > http://lyris.sunbelt-software.com/read/my_forums/
> > or send an email to 
> > [email protected]<mailto:[email protected]>
> > with the body: unsubscribe ntsysadmin
> >
> >
>
> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~
> ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~
>
> ---
> To manage subscriptions click here:
> http://lyris.sunbelt-software.com/read/my_forums/
> or send an email to 
> [email protected]<mailto:[email protected]>
> with the body: unsubscribe ntsysadmin
>
>
>
> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~
> ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~
>
> ---
> To manage subscriptions click here:
> http://lyris.sunbelt-software.com/read/my_forums/
> or send an email to 
> [email protected]<mailto:[email protected]>
> with the body: unsubscribe ntsysadmin
>
> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~
> ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~
>
> ---
> To manage subscriptions click here:
> http://lyris.sunbelt-software.com/read/my_forums/
> or send an email to 
> [email protected]<mailto:[email protected]>
> with the body: unsubscribe ntsysadmin
>
>

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here:
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
[email protected]<mailto:[email protected]>
with the body: unsubscribe ntsysadmin
CONFIDENTIALITY NOTICE: This email, including attachments, is for the sole use 
of the intended recipient(s) and may contain confidential and/or protected 
health information. Under the Federal Law (HIPAA), the intended recipient is 
obligated to keep this information secure and confidential. Any disclosure to 
third parties without authorization from the member of as permitted by law is 
prohibited and punishable under Federal Law. If you are not the intended 
recipient, please contact the sender by reply e-mail and destroy all copies of 
the original message.

NOTA DE CONFIDENCIALIDAD: Este facsímile, incluyendo lo adjunto, es para el uso 
exclusivo del destinatario(s) y puede contener información confidencial y/o 
información protegida de salud. En virtud de la Ley Federal (HIPAA), el 
destinatario tiene la obligación de mantener esta información segura y 
confidencial. Cualquier divulgación a terceros sin la autorización de los 
miembros de lo permitido por la ley está prohibido y penado en virtud de la Ley 
Federal. Si usted no es el destinatario, por favor, póngase en contacto con el 
remitente por teléfono y destruir todas las copias del mensaje original

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
[email protected]<mailto:[email protected]>
with the body: unsubscribe ntsysadmin


~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
[email protected]<mailto:[email protected]>
with the body: unsubscribe ntsysadmin

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
[email protected]<mailto:[email protected]>
with the body: unsubscribe ntsysadmin

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
[email protected]<mailto:[email protected]>
with the body: unsubscribe ntsysadmin

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to [email protected]
with the body: unsubscribe ntsysadmin

Reply via email to