So you need to bridge the RJ45 to wireless because it is a sealed appliance? Something like this:
http://homestore.cisco.com/en-us/adapters/linksys-WET610N_stcVVproductId65221232VVcatId543809VVviewprod.htm You can also get a wireless card that is USB if there is a free USB slot in the appliance. -----Original Message----- From: HELP_PC [mailto:[email protected]] Sent: Tuesday, June 07, 2011 12:57 PM To: NT System Admin Issues Subject: R: Connecting a built-in Webserver of a security device Cannot be connected to the main router through cable because physical obstruction , so I need the device using a local router that gets a wireless connection from the main one GuidoElia HELPPC -----Messaggio originale----- Da: Kurt Buff [mailto:[email protected]] Inviato: martedì 7 giugno 2011 17.52 A: NT System Admin Issues Oggetto: Re: Connecting a built-in Webserver of a security device I'm not sure what you mean by "ureachable through cabling". Do you mean that you cannot physically attach a cable to the router? Is this because of physical obstruction, or because it's too far away? Kurt On Tue, Jun 7, 2011 at 08:04, HELP_PC <[email protected]> wrote: > > The problem is that even if I want to connect the device to a router > it should be wireless because the internet router is unreachable > through cabling > > > GuidoElia > HELPPC > > -----Messaggio originale----- > Da: Kurt Buff [mailto:[email protected]] > Inviato: martedì 7 giugno 2011 16.42 > A: NT System Admin Issues > Oggetto: Re: Connecting a built-in Webserver of a security device > > Just exactly how is this set up? I'd be tempted to plug both the router and > the device into a small switch, and use that to figure out what's happening. > > Also, does your device require a crossover cable if plugged directly into a > router? I wonder if it doesn't do auto-detect of MDI-X. > > On Tue, Jun 7, 2011 at 07:26, HELP_PC <[email protected]> wrote: >> I need to connect a built-in web server of a fire security device >> (only Rj45 output present) to a Internet router , but I cannot reach >> the router through cable so I think I have to use one or two access points . >> I am a bit confused on how to >> >> TIA >> >> GuidoElia >> HELPPC >> >> >> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ >> <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ >> >> --- >> To manage subscriptions click here: >> http://lyris.sunbelt-software.com/read/my_forums/ >> or send an email to [email protected] >> with the body: unsubscribe ntsysadmin > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ > <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to [email protected] > with the body: unsubscribe ntsysadmin > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ > <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to [email protected] > with the body: unsubscribe ntsysadmin > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected] with the body: unsubscribe ntsysadmin ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected] with the body: unsubscribe ntsysadmin ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected] with the body: unsubscribe ntsysadmin
