Here's the trace route to the new switch's IP.
tracert 172.18.1.51
Tracing route to 172.18.1.51 over a maximum of 30 hops
1 1 ms <1 ms <1 ms 172.16.254.254 <--- My Location Main Cisco
Router
2 1 ms 1 ms 1 ms 172.16.254.253 <--- My Location Cisco
Router that connects to wireless bridge
3 2 ms 2 ms 2 ms 192.168.100.2 <--- Remote Cisco Router that
connects to wireless bridge
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
Here's a trace route from the remote site to a switch at my location.
tracert 172.16.1.51
Tracing route to 172.16.1.51 over a maximum of 30 hops
R
1 <1 ms <1 ms <1 ms 172.18.254.254 <--- Remote Cisco Router
that connects to wireless bridge
2 1 ms 1 ms 2 ms 192.168.100.1 <--- My Location Cisco Router
that connects to wireless bridge
3 2 ms 2 ms 2 ms 172.16.1.51 <--- My Location HP Switch
So the failure is happening in the Remote Cisco router, between the
192.168.100.x interface and the 172.18.x.x interface.
I can successfully ping 172.18.1.51 from the Remote Cisco Router. If I look at
the ARP table in the Remote Cisco Router, it shows the MAC address of the new
switch associated with 172.18.1.51.
----------------------
Bob Hartung
Wisco Industries, Inc.
736 Janesville St.
Oregon, WI 53575
Tel: (608) 835-3106 x215
Fax: (608) 835-7399
e-mail: bhartung(at)wiscoind.com
_____
From: Andrew S. Baker [mailto:[email protected]]
To: NT System Admin Issues [mailto:[email protected]]
Sent: Thu, 07 Jul 2011 09:12:31 -0500
Subject: Re: Remote Access Problem with HP Switch
How about the gateway and the subnet mask? What happens if you
traceroute to the switch?
-ASB: http://about.me/Andrew.S.Baker
Sent from my Motorola Droid
On Jul 7, 2011 7:41 AM, "Bob Hartung" <[email protected]> wrote:
~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
---
To manage subscriptions click here:
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to [email protected]
with the body: unsubscribe ntsysadmin
~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
---
To manage subscriptions click here:
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to [email protected]
with the body: unsubscribe ntsysadmin
