I'm pretty sure no. I don't think telnet protocol is used at all. On Thu, Jul 14, 2011 at 9:05 PM, Jimmy Tran <[email protected]> wrote:
> My WDS server is running. However on my drive home from work, I realized > my WDS server was installed on a machine in the DMZ. This is probably not > ideal. I will try installing on a server on the same subnet. Should I be > able to telnet into the WDS server on port 4011?**** > > ** ** > > *From:* Jonathan Link [mailto:[email protected]] > *Sent:* Thursday, July 14, 2011 5:42 PM > > *To:* NT System Admin Issues > *Subject:* Re: help setting up WDS**** > > ** ** > > Dumb question...**** > > The WDS server is running. My experience with it has been once you get the > DHCP stuff set, it just runs. Except when the WDS server doesn't start, > which happens occasionally, and I just manually start the service.**** > > On Thu, Jul 14, 2011 at 7:45 PM, Jimmy Tran <[email protected]> wrote:*** > * > > For now, I do have it set to all clients and did not check require for > approval**** > > > Jimmy**** > > **** > > *From:* Jonathan Link [mailto:[email protected]] > *Sent:* Thursday, July 14, 2011 4:45 PM > *To:* NT System Admin Issues > *Subject:* Re: help setting up WDS**** > > **** > > For the Server Properties, under PXE Response tab, do you have respond to > all clients selected? I also checked the box to require approval for > unknown computers. **** > > **** > > On Thu, Jul 14, 2011 at 7:27 PM, Jimmy Tran <[email protected]> wrote:*** > * > > I have WDS installed on a W2k8 server and DHCP on a 2K3 server. I think I > have everything setup properly. I have my server options 60, 66, 67 > configured on my DHCP server. However when I attempt to PXE boot from a > machine, I get the following error: PXE-E55: ProxyDHCP service did not > reply to request on port 4011. I do successfully get an IP address. All > machines are on the same subnet.**** > > **** > > Any help is appreciated. Google has not been very successful in this case. > **** > > **** > > -Jimmy**** > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to [email protected] > with the body: unsubscribe ntsysadmin**** > > **** > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to [email protected] > with the body: unsubscribe ntsysadmin**** > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to [email protected] > with the body: unsubscribe ntsysadmin**** > > ** ** > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to [email protected] > with the body: unsubscribe ntsysadmin**** > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to [email protected] > with the body: unsubscribe ntsysadmin > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected] with the body: unsubscribe ntsysadmin
