Did acording to your instructions. This is what I get from ZTerm
Linux version 2.4.32 ([EMAIL PROTECTED]) (gcc-Version 3.3.6 (Debian 1:3.3.6-13)) #473 M o Mai 1 18:27:56 CEST 2006 No mac-io chip found PMU driver 2 initialized for PowerBook 500PPC/2300/5300/1400, firmware: 05 On node 0 totalpages: 10240 zone(0): 10240 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: video=nbpmacfb ramdisk=8192 keyboard_sends_linux_keycodes=1 console=ttyS0,115200 debug root=/dev/ram System has 35 possible interrupts GMT Delta read from XPRAM: 0 minutes, DST: off via_calibrate_decr: ticks per jiffy = 83336 (500018 ticks) Console: colour dummy device 80x25 Calibrating delay loop... 66.56 BogoMIPS Memory: 37024k available (2340k kernel code, 1440k data, 156k init) [c0000000,c2 800000] Memory: node0 40960 kB Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX m2_get_irq: could not find pending ICR interrupt Registered "pmu" backlight controller, level: 8/15 NuBus: Scanning NuBus slots. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Thermal assist unit not available Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). Using 640x480 ecsc at 60000000, depth=8, pitch=640 Console: switching to colour frame buffer device 80x30 fb0: NuBus PowerMac frame buffer device on /nubus/ecsc input0: Macintosh mouse button emulation pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled Generic RTC Driver v1.07 Checking for internal Macintosh ethernet (SONIC).. yes eth0: warning! sonic entering with priv already allocated! eth0: discarding, will attempt to reallocate sonic.c:v0.92 20.9.98 [EMAIL PROTECTED] eth0: onboard / comm-slot SONIC at 0x80f0a000 Machine check in kernel mode. Caused by (from SRR1=49030): Transfer error ack signal Hope this helps Carlos On 5/2/06, Tobias Netzel <[EMAIL PROTECTED]> wrote:
Hi Carlos, I will take a look at the SONIC driver very soon. I don't know of a way to disable that driver. But it would not be a problem to disable the driver when compiling a new kernel. I'd like to get more information about the machine check. The two lines below aren't the only error messages, are they? In order to get the boot messages sent to the serial port you have to connect you PB to another Macintosh via a serial (printer) cable and give the kernel the boot parameter "console=ttyS0,115200". 115200 is the highest baudrate that will work. You should also add the argument "debug" in order to get more detailed information. In MacOS Classic or MacOS X you can use ZTerm to see what the PB sends. I also did it that way to develop those latest patches as it is the only chance to see what happened before the shutdown "miboot.image" is for use with miboot which is a boot loader that allows you to boot from HFS formatted media like floppy, CD-ROM and hard drive partitions without the need of having MacOS installed at all. With a SCSI CD-ROM that supports booting a MacOS installation CD on your PB you will be able to use the miboot ISO images from the nubus-pmac project site's files section. miboot uses the same routines as BootX but with miboot you can use compressed images while the BootX versions (>=1.2) that support compressed kernels don't support NuBus Macs. Tobias Am 02.05.2006 um 13:36 schrieb Carlos Castro: > Tobias, > > On my PB500 it initializes SONIC and after it sets eth0 the folowing > is printed to screen > > Machine Check in Kernel mode. > Caused by (from SRR1=49030); transfer error ack signal > > > The machine then shuts-down by itself after 3 seconds > > Is this sonic causing problems? Is there a way to disable sonic (like > sonic=no in the kernel boot options) > > One other thing how do I use miboot.image. What kind of image is this? > > Thanks > > Carlos > > On May 1, 2006, at 10:41 PM, Tobias Netzel wrote: > >> Hi all! >> >> I finally managed to get the interrupt handling and PMU stuff stable. >> At least I cannot provoke PMU shutdowns anymore. >> I hope all interrupt related problems like shutdowns, lost >> interrupts, and net device timeouts are now solved. >> On my machine both the orinoco wireless card and the internal cs8900 >> ethernet card are working without problems now and at higher speed >> than before. >> >> Another improvement is the activated CPU power saving for 603 and G3 >> CPUs. >> On my machine when idle over 90% the CPU temperature is about 20° >> less than it used to be (from 75-80° to 55-60°). >> >> The kernel images can be downloaded from my webspace: >> BootX: http://home.vrweb.de/internetzel/vmlinux >> miboot: http://home.vrweb.de/internetzel/miboot.image >> MkLinux Booter: http://home.vrweb.de/internetzel/Mach%20Kernel >> >> I would be glad if everyone out there tested my new patches. >> If they prove to be stable I will provide the patches in order to >> update the source tree. >> >> >> Tobias >> >> >> ------------------------------------------------------- >> Using Tomcat but need to do more? Need to support web services, >> security? >> Get stuff done quickly with pre-integrated technology to make your >> job easier >> Download IBM WebSphere Application Server v.1.0.1 based on Apache >> Geronimo >> http://sel.as-us.falkag.net/sel? >> cmd=lnk&kid=120709&bid=263057&dat=121642 >> _______________________________________________ >> Nubus-pmac-users mailing list >> Nubus-pmac-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/nubus-pmac-users > > > > ------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, > security? > Get stuff done quickly with pre-integrated technology to make your job > easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache > Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642 > _______________________________________________ > Nubus-pmac-users mailing list > Nubus-pmac-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/nubus-pmac-users > ------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmdlnk&kid0709&bid&3057&dat1642 _______________________________________________ Nubus-pmac-users mailing list Nubus-pmac-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nubus-pmac-users
------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642 _______________________________________________ Nubus-pmac-users mailing list Nubus-pmac-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nubus-pmac-users
