Hi There Is there a way to tell the camera tracker in Nuke that 2 different takes are using the smae camera and should match on a particular frame? Here is the situation:
- I have 2 motion control passes that I need to comp together. - I want to use the first pass as my master take (A). The second (B) one has quite a bit of bounce in it (from the motion control rig) so I need to stabilize it and then track it to the master plate. - I want to use the camera tracker because a 2 points track is not going to work (shot is too long and it pans around so I can't get a single continous track) - I want to get a camera for both takes but I need the cameras to match at least on one frame (position/rotation/focal/scale etc...) Let's say that the 2 takes match perfectly on frame 1 So if track my master plate first. Then I track the second plate but is there a way to tell Nuke to use the A camera scene as a starting point and track the B plate from there? To be able to stabilise/track both takes with that setup, I need them to be in the same world space. I hope this makes sense. Any suggestion appreciated! Thanks jean-luc
_______________________________________________ Nuke-users mailing list [email protected] http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users
