very kewl... :-)
On Thu, Jul 31, 2014 at 1:51 PM, Matthew Taylor <[email protected]> wrote: > I just added a section to one of the main wiki pages that exposes it > better: > > > https://github.com/numenta/nupic/wiki/Installing-and-Building-NuPIC#relationship-with-nupiccore > > --------- > Matt Taylor > OS Community Flag-Bearer > Numenta > > > On Thu, Jul 31, 2014 at 11:46 AM, cogmission1 . < > [email protected]> wrote: > >> Nice! I was unaware of that wiki page. I don't know if added bits from >> above is actually needed if the build will eventually detect differences in >> nupic.core locally and remotely - at some future date? >> >> I just didn't know there was already a wiki with a lot of this... >> >> David >> >> >> >> >> >> On Thu, Jul 31, 2014 at 1:07 PM, Matthew Taylor <[email protected]> wrote: >> >>> David, >>> >>> There is a wiki: >>> https://github.com/numenta/nupic/wiki/NuPIC's-Dependency-on-nupic.core >>> >>> But if you think it could be more useful with the info from above, >>> please edit it. >>> >>> --------- >>> Matt Taylor >>> OS Community Flag-Bearer >>> Numenta >>> >>> >>> On Thu, Jul 31, 2014 at 10:42 AM, cogmission1 . < >>> [email protected]> wrote: >>> >>>> The above (re: optional update/building of nupic.core and the project >>>> content description) would might be good to have on the wiki - I found it >>>> really helpful David >>>> >>>> -David Ray >>>> >>>> >>>> On Thu, Jul 31, 2014 at 11:59 AM, David Ragazzi <[email protected] >>>> > wrote: >>>> >>>>> Hi Cavan, >>>>> >>>>> I answered the Dr. Blackburn (private) message about this, but now I >>>>> see your question on ML. Nice that you managed install NuPIC. By the way, >>>>> if you have limited internet conection and you aren't able to update >>>>> nupic.core at every build, you can bypass this process. >>>>> >>>>> I explanned this in the message: >>>>> >>>>> >>Yeah, you're right on your thoughts. NuPIC is basically a Python >>>>> project that use C++ extensions due to performance issues. On of the C++ >>>>> extensions is nupic.core which is provided at a separated repository. When >>>>> you install for the first time, a copy of nupic.core is cloned from >>>>> scratch >>>>> and then 'setup.py' will build it using CMake/Make. In next times, it will >>>>> simply check if there're changes in nupic.core repo and built it again. >>>>> >> >>>>> >>The question is: is possible bypass this problem? >>>>> >>Yes: you can download nupic.core separately into 'extensions/core' >>>>> folder and then disable/remove the lines in the CMake file that download >>>>> and fetch changes in nupic.core. >>>>> >> >>>>> >>This worked for me several times. Let me know if you any issues with >>>>> this. :-) >>>>> >>>>> David >>>>> >>>>> >>>>> On 31 July 2014 13:20, Matthew Taylor <[email protected]> wrote: >>>>> >>>>>> Cavan, >>>>>> >>>>>> There is an open bug for this. I was wondering if it would come up >>>>>> again. >>>>>> https://github.com/numenta/nupic/issues/1140#issuecomment-50277312 >>>>>> >>>>>> I'll try to replicate today. >>>>>> >>>>>> --------- >>>>>> Matt Taylor >>>>>> OS Community Flag-Bearer >>>>>> Numenta >>>>>> >>>>>> >>>>>> On Thu, Jul 31, 2014 at 9:08 AM, Cavan Day-Lewis < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Classification: NPL Management Ltd - Public >>>>>>> >>>>>>> Hi Matt, >>>>>>> >>>>>>> Thank you very much, this fixed the problem, I now have NuPIC >>>>>>> installed! I am trying your tutorial but have been unsuccessful when it >>>>>>> comes to swarming. I receive the following error: >>>>>>> >>>>>>> IOError: [Errno 2] No such file or directory: >>>>>>> '/usr/local/lib/pyhton2.7/dist-packages/nupic-0.1.0-py2.7.egg/nupic/swarming/jsonschema/jobParamsSchema.json' >>>>>>> >>>>>>> p.s. (I ran the test swarm successfully: >>>>>>> '$NUPIC/scripts/run_swarm.py >>>>>>> $NUPIC/examples/swarm/simple/search_def.json >>>>>>> --maxWorkers=4') >>>>>>> >>>>>>> Once again thanks for your help. >>>>>>> >>>>>>> Cavan >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -----Original Message----- >>>>>>> From: nupic [mailto:[email protected]] On Behalf Of >>>>>>> Matthew Taylor >>>>>>> Sent: 30 July 2014 19:59 >>>>>>> To: NuPIC general mailing list. >>>>>>> Subject: Re: [nupic-discuss] Error running swarms [NP] >>>>>>> >>>>>>> You might try editing this file: >>>>>>> >>>>>>> https://github.com/numenta/nupic/blob/master/.nupic_modules >>>>>>> >>>>>>> It should be right in your root of NuPIC. Update it to: >>>>>>> >>>>>>> # Default nupic.core dependencies (override in optional >>>>>>> .nupic_config) NUPIC_CORE_REMOTE = ' >>>>>>> https://github.com/numenta/nupic.core.git' >>>>>>> NUPIC_CORE_COMMITISH = '48e4c912c9ee03b8a405c7130a52fb01ce6c6068' >>>>>>> >>>>>>> Try that and build again. >>>>>>> --------- >>>>>>> Matt Taylor >>>>>>> OS Community Flag-Bearer >>>>>>> Numenta >>>>>>> >>>>>>> >>>>>>> On Wed, Jul 30, 2014 at 9:02 AM, Cavan Day-Lewis < >>>>>>> [email protected]> wrote: >>>>>>> > Classification: NPL Management Ltd - Public >>>>>>> > >>>>>>> > Hi David and Matt, >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > Thank you very much for your advice. After making sure my >>>>>>> dependencies >>>>>>> > are up to date I’ve got to the stage: >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > python setup.py install --(I’ve tried running it >>>>>>> normally and as >>>>>>> > the root user, with the “sudo” command) >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > and the following error message occurred: >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > fatal: unable to connect to github.com: >>>>>>> > >>>>>>> > github.com[0: 192.30.252.130]: errno=Connection refused >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > Cloning into ‘/home/john/nupic2/nupic/extensions/core’... >>>>>>> > >>>>>>> > CMake Error at CMakeLists.txt:267 (message): >>>>>>> > >>>>>>> > Unable to clone git://github.com/numenta/nupic.core.git into >>>>>>> > /home/john/nupic2/nupic/extensions/core >>>>>>> > >>>>>>> > Call Stack (most recent call first): >>>>>>> > >>>>>>> > CMakeLists.txt:751 (generate_submodule_library) >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > Unable to generate build scripts! >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > I believe this issue stems from the fact that the network I’m on at >>>>>>> > work, has a firewall preventing me from using the git:// protocol, >>>>>>> I >>>>>>> > will need to use the https:// protocol instead. Is it a good idea >>>>>>> to >>>>>>> > edit the code to fix this, if so where would I find the code? >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > Thanks, >>>>>>> > >>>>>>> > Cavan >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > From: nupic [mailto:[email protected]] On Behalf Of >>>>>>> > Matthew Taylor >>>>>>> > Sent: 30 July 2014 16:29 >>>>>>> > To: NuPIC general mailing list. >>>>>>> > Subject: Re: [nupic-discuss] Error running swarms [NI] >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > Cavan, >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > You won't need to reclone the project. Just set the $NUPIC >>>>>>> environment >>>>>>> > variable to point to the path where you have it checked out and >>>>>>> run: >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > cd $NUPIC >>>>>>> > >>>>>>> > git clean -dfx >>>>>>> > >>>>>>> > git pull origin master >>>>>>> > >>>>>>> > python setup.py install >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > If you want to try to run tests... >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > ./run_tests.sh -u >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > But yeah, like David said, you might need to ensure your >>>>>>> dependencies >>>>>>> > are installed with the right versions. >>>>>>> > >>>>>>> > >>>>>>> > --------- >>>>>>> > >>>>>>> > Matt Taylor >>>>>>> > >>>>>>> > OS Community Flag-Bearer >>>>>>> > >>>>>>> > Numenta >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > On Wed, Jul 30, 2014 at 4:40 AM, David Ray >>>>>>> > <[email protected]> >>>>>>> > wrote: >>>>>>> > >>>>>>> > Hi Cavan, >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > I tried re-installing over an old installation also, and I just >>>>>>> want >>>>>>> > to warn you of uninstalling numpy before you proceed. I am still >>>>>>> > working with Matt (haven't gotten back to it yet because it's my >>>>>>> work >>>>>>> > computer and I am busy ...well... Working :-) ). But this may cause >>>>>>> > some problems that Matt and I haven't worked through. >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > Just a "heads-up" >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > David Ray >>>>>>> > >>>>>>> > Sent from my iPhone >>>>>>> > >>>>>>> > >>>>>>> > On Jul 30, 2014, at 4:30 AM, "Cavan Day-Lewis" >>>>>>> > <[email protected]> >>>>>>> > wrote: >>>>>>> > >>>>>>> > Classification: NPL Management Ltd - Internal >>>>>>> > >>>>>>> > I am relatively new to Nupic and have experienced a few issues >>>>>>> > regarding running swarms. >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > I have tried to follow the steps on Matt Taylor’s One Hot Gym >>>>>>> > Prediction Tutorial video on YouTube, however, I have been >>>>>>> > unsuccessful in running a swarm over the “rec-center-hourly.csv” >>>>>>> file. >>>>>>> > I received an error that said I had a non-ASCII character >>>>>>> somewhere in >>>>>>> > the code even though all of the code matched the example on GitHub >>>>>>> and >>>>>>> > there didn’t seem to be any odd characters. I have come to the >>>>>>> > conclusion that I am probably running an outdated version of >>>>>>> NuPIC. I >>>>>>> > installed it about a year ago, so can I update this version of >>>>>>> NuPIC >>>>>>> > by entering in the “git clone https://github.com/numenta/nupic.git >>>>>>> ” >>>>>>> > command or do I need to start again from scratch by removing the >>>>>>> old version and installing the current version? >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > I would appreciate any advice on this matter. >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > Thanks, >>>>>>> > >>>>>>> > Cavan >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > ________________________________ >>>>>>> > >>>>>>> > If you have received this message in error, please notify us and >>>>>>> > remove it from your system. >>>>>>> > NPL Management Ltd cannot guarantee that the e-mail or any >>>>>>> attachments >>>>>>> > are free from viruses. >>>>>>> > >>>>>>> > NPL Management Ltd is a company registered in England and Wales, >>>>>>> number: >>>>>>> > 2937881 >>>>>>> > Registered office: Serco House | 16 Bartley Wood Business Park | >>>>>>> Hook, >>>>>>> > Hampshire | UK | RG27 9UY >>>>>>> > >>>>>>> > ________________________________ >>>>>>> > >>>>>>> > <npl-logo.jpg> >>>>>>> > >>>>>>> > STAY CONNECTED >>>>>>> > <twitter.jpg> <facebook.jpg> <youtube.jpg> <apple.jpg> >>>>>>> <connect.jpg> >>>>>>> > >>>>>>> > _______________________________________________ >>>>>>> > nupic mailing list >>>>>>> > [email protected] >>>>>>> > http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org >>>>>>> > >>>>>>> > >>>>>>> > _______________________________________________ >>>>>>> > nupic mailing list >>>>>>> > [email protected] >>>>>>> > http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > _______________________________________________ >>>>>>> > nupic mailing list >>>>>>> > [email protected] >>>>>>> > http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org >>>>>>> > >>>>>>> >>>>>>> _______________________________________________ >>>>>>> nupic mailing list >>>>>>> [email protected] >>>>>>> http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org >>>>>>> >>>>>>> -- >>>>>>> If you have received this message in error, please notify us and >>>>>>> remove it from your system. >>>>>>> NPL Management Ltd cannot guarantee that the e-mail or any >>>>>>> attachments are free from viruses. >>>>>>> >>>>>>> NPL Management Ltd is a company registered in England and Wales, >>>>>>> number: 2937881 >>>>>>> Registered office: Serco House | 16 Bartley Wood Business Park | >>>>>>> Hook, Hampshire | UK | RG27 9UY >>>>>>> >>>>>>> _______________________________________________ >>>>>>> nupic mailing list >>>>>>> [email protected] >>>>>>> http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org >>>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> nupic mailing list >>>>>> [email protected] >>>>>> http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> David Ragazzi >>>>> MSc in Sofware Engineer (University of Liverpool) >>>>> OS Community Commiter at Numenta.org >>>>> -- >>>>> "I think James Connolly, the Irish revolutionary, is right when he >>>>> says that the only prophets are those who make their future. So we're >>>>> not anticipating, we're working for it." >>>>> >>>>> _______________________________________________ >>>>> nupic mailing list >>>>> [email protected] >>>>> http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> nupic mailing list >>>> [email protected] >>>> http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org >>>> >>>> >>> >>> _______________________________________________ >>> nupic mailing list >>> [email protected] >>> http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org >>> >>> >> >> _______________________________________________ >> nupic mailing list >> [email protected] >> http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org >> >> > > _______________________________________________ > nupic mailing list > [email protected] > http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org > >
_______________________________________________ nupic mailing list [email protected] http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org
