Hi all, I'm from Tripp Lite.
Many of our smaller standby and line-interactive have recently changed from 20xx protocol numbers to 302x protocol numbers. This has caused issues for a few people on the users mailing list, for example: https://alioth-lists.debian.net/pipermail/nut-upsuser/2020-June/011876.html https://alioth-lists.debian.net/pipermail/nut-upsuser/2020-June/011878.html https://alioth-lists.debian.net/pipermail/nut-upsuser/2020-May/011840.html It seems like "productid=302x" in ups.conf (e.g. productid=3024 here: https://alioth-lists.debian.net/pipermail/nut-upsuser/2020-May/011860.html) can fix the problems. Is there something we can do to get that fix baked-in so these work with the same (or better) level of compatibility as the old 20xx UPSes "out of the box"? Thank you, David Zomaya Tripp Lite ________________________________ This message is for the addressee's use only. It may contain confidential information. If you receive this message in error, please delete it and notify the sender. Tripp Lite disclaims all warranties and liabilities, and assumes no responsibility for viruses which may infect an email sent to you from Tripp Lite and which damage your electronic systems or information. It is your responsibility to maintain virus detection systems to prevent damage to your electronic systems and information. _______________________________________________ Nut-upsdev mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev
