One of these may fit, they should all support the USB HID protocol, OpenUPS is listed on the NUT HCL. The first (OpenUPS) supports various battery configurations so is the most flexible.
https://www.mini-box.com/OpenUPS?sc=8&category=1264 https://www.mini-box.com/OpenUPS2?sc=8&category=1264 https://www.mini-box.com/NUC-UPS?sc=8&category=1264 On Wed, 2 Feb 2022 15:53:39 +0000 "Grage, Fabian" <[email protected]> wrote: > Hey i have a quesiton regarding NUT compability: i asked a manufacturer about > whether his product is compatible or not and this was his answer: > (p.s. im trying to find a 12V UPS that has specs along the lines as the one > mentioned in the email that can also trigger the NUT pugin on my > openmediavault server (running on a RockPro64 SBC with 12V)) > > I assume the answer the manufacturer gave means no? > > Thank you for reading! > > > ________________________________ > Von: Shanqiu <[email protected]> > Gesendet: Mittwoch, 2. Februar 2022 16:31 > An: Grage, Fabian > Betreff: Re: Question regarding Mini UPS FX 5-12 Pro > > Hi Fabian, > > sorry for late reply, because we are in holiday now. > > about NUT protocoll, we donot have the specification and donot know what's > the input voltage and current required. > > so we cannot tell it's supported or not. > > please if possible check the input voltage and current of NUT protocoll. > > if its: > 12V at any current below 3.5A, > 9V at any current below 3A, > or 5V at any current below 5A. > > it will be supported. > > thanks and happy 2022. > ________________________________ > Alvin > Customer Support Director > TEL.: +86 755 2350 1957 > MOB.: +86 138 2527 8598 > www . hgdups . com > Office: Bldg4., Tongtaishidai Industrial Center, Fuyong, Baoan, Shenzhen. > Factory: Minghui Bldg., Yinying Rd., Gaoying County, Dalang, Dongguan. > > From: Fabian > Date: 2022-02-01 23:34 > To: [email protected]<mailto:[email protected]> > Subject: Question regarding Mini UPS FX 5-12 Pro > Hello HGD support, > > can you tell me if the FX 5-12 Pro mini UPS > (https://www.worldwidevoltage.com/fx-5-12.html ) supports the NUT protocoll? > > > About the NUT protocoll: https://networkupstools.org/ > > Best regards, > Fabian > _______________________________________________ Nut-upsdev mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev
