mateuszx via Nut-upsdev <[email protected]> writes: > At my workplace I have exact UPS config as stated in the subject (APC MGE > Galaxy 5500 + AP9635CH). > I have it set up to work with snmp-ups NUT driver. > Despite many readings from *upsc* command I am not receiving "On Line > Status" (ups.status OL) nor "On Battery Status" (ups.status OB) and > therefore I can't get my systems to shutdown during a power outage event. > (device and ups) Serial Number seems to be missing too in both *upsc *AND Web > Interface of Network Management Card. > It can read battery charge just fine (it can even trigger Low Battery > Status!). > When I unplug the UPS from line power it does indeed log this event on the > Web Interface.
I would run tcpdump and record and examine the SNMP traffic, and turn on debugging in the driver. It is likely that the SNMP queries for status are not doing what the driver author expected. You'll have to find out if your UPS has different variables. snmpwalk may also be useful, or docs. _______________________________________________ Nut-upsdev mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev
