Understood, thats a good lead. Seems a lot less functional than USB HID
power device. Thank you.
--
Best regards
Łukasz Przeniosło
------ Original Message ------
From "Stuart Henderson via Nut-upsdev"
<[email protected]>
To [email protected]
Date 2023-03-22 12:23:56
Subject Re: [Nut-upsdev] Free and well documented NUT driver protocol
On 2023-03-20, Łukasz Przeniosło <[email protected]> wrote:
Thank you for the link. It does seem what I am looking for. Are you aware
of any similar standard created for a serial device? I have a working CDC
usb setup, which is why I am asking. If required, will switch to HID though.
I don't think there's a fully documented spec for a standard serial
protocol for controlling UPS, the best you're likely to get is a common
reverse-engineered one, there's some advice in the old list post at
https://nut-upsdev.alioth.debian.narkive.com/HziUB0aa/ups-serial-protocol
_______________________________________________
Nut-upsdev mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev
_______________________________________________
Nut-upsdev mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev
