As per https://github.com/networkupstools/nut/pull/1982 I'm looking to
add a few more variables from the CyberPower SNMP MIB. At question in
particular are the values added to the ups.status variable coming from
the CPS-MIB::upsStatus.0 OID. These values are, from the MIB:
upsStatus OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
overheat (2),
hardwarefault (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS system status."
::= { upsSystem 1 }
and seem to reflect a handful of hardware error conditions. In the PR
I've just made up a couple of values that will be appended to the
status if present ("OH" (overheat) and "HW" (hardwarefault)) and are,
I admit, relatively arcane. Feedback is welcomed.
I would also consider that these conditions might be better served as
alarms (ups.alarm) where, it seems, more descriptive messages are
applicable.
Thoughts?
--
Craig Holyoak
[email protected]
http://www.helmsdeep.org/
_______________________________________________
Nut-upsdev mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev
