Hello Jim,
That’s a great help for me. You’re a so kind person ~
Our engineer download the branches f17d9f5 as below and repackage it
for test. After testing, The Beta NUT works well with ST VID "0x0483", PID
"0xA430.
Please tell me how to speed up for merging this to formal version. May
I have your predict schedule if possible? Thanks.
GitHub - jimklimov/nut at f17d9f5428a9666090dc45ff7bae5862dd056986
<https://github.com/jimklimov/nut/tree/f17d9f5428a9666090dc45ff7bae5862dd056986>
Thanks again for your great help
Eric Hsu
From: Jim Klimov <[email protected]>
Sent: Thursday, February 15, 2024 5:17 PM
To: [email protected]
Cc: nut-upsdev <[email protected]>
Subject: Re: [Nut-upsdev] NUT supports new VID/PID
Hello, and thanks for the clarifications.
As described, the change does not seem to be too complex on the NUT project's
side, the PR posted below took about an hour with some research and this
write-up, so I'm not sure I can put a price tag on it :) A donation at
https://opencollective.com/networkupstools or
https://github.com/sponsors/networkupstools would be welcome though, more so a
recurring one.
The technicalities about it have several correct answers, depending on the
situation:
* If your testbed has NUT v2.8.1 (packaged or otherwise available), its
`usbhid-ups` driver should newly support a `subdriver` option - specifically to
help gauge support of existing code paths for `vendorid` and `productid` values
that are not yet built into the binaries as known supported handlers for these
devices. So hopefully (this feature was not extensively tested yet) you can in
fact run `usbhid-ups -s test -x port=auto -x vendorid=0483 -x productid=a430 -x
subdriver="cyberpower" -DDDDDD -d 1` and get a detailed log of NUT driver
start-up (devices found, matching attempts tried and if they succeeded, first
device data walk...) and eventually a list of collected data points similar to
what the `upsc` client would report in production.
* If you can build NUT from sources on a system (PC, SBC...) connected to an
UPS for the testing, this would be best for practical testing (if the proposed
change works out of the box) and for possible iterations on the modified code
(especially if the first attempt does not get it right, or if there would be
some more work needed beside "knowing" a couple of new IDs) :)
The Wiki article
https://github.com/networkupstools/nut/wiki/Building-NUT-for-in%E2%80%90place-upgrades-or-non%E2%80%90disruptive-tests
details custom builds of NUT for testing from the build workspace (not
necessarily installing into the OS) and prerequisites for a number of platforms
based on experience with the NUT CI farm summarized at
https://networkupstools.org/docs/user-manual.chunked/_build_prerequisites_to_make_nut_from_scratch_on_various_operating_systems.html
/ https://github.com/networkupstools/nut/blob/master/docs/config-prereqs.txt.
I've posted the anticipated change set as a pull request
https://github.com/networkupstools/nut/pull/2312 so to build it from sources
per instructions in Wiki, you would need to clone the PR's source branch, e.g.:
:; git clone https://github.com/jimklimov/nut -b cyberenergy nut
Hope this helps,
Jim Klimov
On Thu, Feb 15, 2024 at 5:24 AM <[email protected]
<mailto:[email protected]> > wrote:
Hello Jim,
Thanks for your prompt reply and happy lunar new year.
I think my situation is first one. Actually I am from CyberPower UPS
manufacture. In the past, CyberPower UPS works well with NUT. Today, I want to
use another VID/PID to fulfill ODM business rather than CyberPower brand UPS.
My engineer will apply standard USB power device description like as
CyberPower’s USB design. The only difference is VID/PID. What I request is
someone could help me finish following two items.
A. Offer the beta NUT version that should include below requirement to me.
I will test it by myself.
I. New VID "0x0483", PID "0xA430"
II. Corresponding existing (sub-)driver "usbhid-ups"
III. Manufacture "CyberEnergy"
B. Once the beta NUT is compatible with new UPS, help me pull request until
formal NUT support my new VID/PID device.
Can you help me or suggest proper person to complete above? How much should I
pay for this, please let me know if anything that I should notice.
Thank you very much and look forward your further feedback,
Eric Hsu
From: Jim Klimov <[email protected] <mailto:jimklimov%[email protected]> >
Sent: Wednesday, February 7, 2024 4:10 PM
To: [email protected] <mailto:[email protected]>
Cc: nut-upsdev <[email protected]
<mailto:[email protected]> >
Subject: Re: [Nut-upsdev] NUT supports new VID/PID
Hello and welcome!
It really depends on what it really means to "add support":
If the needed abilities are already present in an existing driver and its
sub-driver (`usbhid-ups` as you say, if this uses a HID protocol, or
`nutdrv_qx` likely otherwise), and the issue is just about adding the IDs to
the suitable handler so it "knows" it is compatible during device detection,
then it is trivial. In fact, if you go to NUT GitHub Wiki page to look for
"Building in-place" instructions, you can experiment locally and post a pull
request with a checked-working change set.
If this issue is however about adding a new (or extending an old)
(sub-)driver, then I really hope some of the list members can help with the
investigation and coding.
Hope this helps,
Jim Klimov
On Wed, Feb 7, 2024, 07:50 abeyoungh--- via Nut-upsdev
<[email protected] <mailto:[email protected]>
> wrote:
Hi all,
I am looking for someone who help me request NUT to supports power
device which has unregistered VID/PID. I will pay you for your service.
Detail requirement
1. New VID "0x0483", PID "0xA430"
2. Corresponding driver "usbhid-ups"
3. Manufacture "CyberEnergy"
I have no idea to handle this. If need more information, please let me know,
thanks.
_______________________________________________
Nut-upsdev mailing list
[email protected] <mailto:[email protected]>
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev
_______________________________________________
Nut-upsdev mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev
