Hi, i just got a Phoenix Technologies PH1200UPSB 1200va serial-port ups and it is only partially supported by bestups driver (needs manual ID or driver rewriting).
It comes with a tool called UPSilon 2.1 on a CD (which worked better with TERM=linux). After [sl]tracing it i came to these results: COMMANDS : - Command: I Response: "#XPHOENIX TECH PH1200UPS VER2.00C " - Command: F Response: "#220.0 006 23.50 50.0" Seem to be nominal data: rating voltage, rating current, shutdown or maximum batt voltage and hertz ? - Command: Q1 Response: "(234.0 165.0 234.0 000 50.0 27.2 00.0 00001010" Command sequence used by UPSilon: Q1, I, F, Q1, Q1, Q1, ... UPSilon Screen capture: (UPSilon) UPS Status Screen, Ver. 2.1 XPHOENIX TECH PH1200UPS VER2.00C Copyright(C) 1998 Mega System Technologies, Inc. 2008-06-10, 13:22 Tue. +-------------------------------------++--------------------------------------+ | UPS Type : Standby || UPS Input Voltage: 231.0 Volt | | UPS Rating Voltage: 220.0 Volt || ----|-- | | UPS Rating Current: 6 Amp || 180 190 200 210 220 230 240 | | UPS Line Frequency: 50.0 Hz || | | Communication Port: /dev/ttyS0 || UPS Output Voltage: 231.0 Volt | | || ----|-- | | Input AC Power : Normal || 180 190 200 210 220 230 240 | | Battery Status : Normal || | | UPS Functioning: Normal || UPS Power Loading: 0% | | Boost/Buck : OFF || ----|----|----|----|----|----|-- | | UPS Temperature: 00.0 C || 0 20 40 60 80 100 120 | | UPS Self-Test : Stop || | | || UPS Battery Level: 100% | | Count Down Function: ON || ----|-- | | Scheduling Function: OFF || 0 20 40 60 80 100 120 | | Next Shutdown Time : --- --:-- || | | Next Restart Time : --- --:-- || UPS Input Frequency: 50.0 Hz | | ACfail Shutdown Delay: 5.0 Min. || --|----|----|----|-- | | UPS Turn Off Delay : 3.0 Min. || 0 20 40 60 80 90 100 | +-------------------------------------++--------------------------------------+ System: Linux[localhost.localdomain] Type 'r' to Redraw, Type 'q' to Quit. (Note: in&out voltage varies among: 229.0, 231.0, 234.0, 237.0) UPSC OUTPUT WITH SAMPLE ID: battery.charge: 45.3 battery.voltage: 27.2 battery.voltage.nominal: 12 driver.name: bestups driver.parameter.ID: 610,1500,120,120,10.0,48.0 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.2.2 driver.version.internal: 1.04 input.frequency: 50.0 input.voltage: 231.0 input.voltage.nominal: 120 output.voltage: 231.0 output.voltage.nominal: 120 ups.load: 000 ups.mfr: Best Power ups.model: 610 1500 ups.status: OL ups.temperature: 00.0 _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
