Citeren Royce Williams <[EMAIL PROTECTED]>: > Externally, the G1000U looks much like the SMART1000LCD: an amber > LCD, jacks for coax and telephone, four protected receptacles and > four non-protected, and a USB-only interface. Internally, it's > product 2007, vendor 09ae.
That combination is indeed supported through the usbhid-ups driver. > I am running FreeBSD 6.4 with a stock kernel (and so uhid is > enabled) and I installed the FreeBSD port of NUT (nut-2.2.2) today > with the following options set: > > [ ] SERIAL SERIAL support > [X] USB USB support > [X] SNMP SNMP support > [X] NEON NEON XML/HTTP support > [ ] HAL HAL support > [X] IPV6 IPV6 support > [ ] DEVEL Install header files > [X] CGI Web CGI interface > > > I read Charles Sprickman's helpful post 'Some FreeBSD tips': > > http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-March/002513.html > > ... but I wasn't able to figure out if uhid should be disabled or not > for my unit. It should for all NUT drivers using the USB interface on FreeBSD, except for the energizerups driver that is scheduled for removal anyway. Best regards, Arjen -- Please keep list traffic on the list _______________________________________________ Nut-upsdev mailing list Nut-upsdev@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev