On Fri, 19 Dec 2008 22:14:36 +0100 Arjen de Korte <[email protected]> wrote:
> Could you try the 'blazer_usb' driver from the SVN trunk? Run it with > debugging enabled (-DDD, not higher!) and post the output here. Looks perfect initially, but then fails, and seems to lock up the connection (fails instantly on the second run), so excuse me while I go to my server room to replug the cable. :) $ sudo ./blazer_usb -DDD -a ippon Network UPS Tools - Megatec/Q1 protocol USB driver 0.02 (2.3.0-1660M) debug level is '3' Checking device (1D6B/0002) (002/001) - VendorID: 1d6b - ProductID: 0002 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 002 Trying to match device Device does not match - skipping Checking device (06DA/0003) (001/003) - VendorID: 06da - ProductID: 0003 - Manufacturer: CTN - Product: USB UPS - Serial Number: unknown - Bus: 001 Trying to match device Device matches Trying megatec protocol... send: Q1 read: (223.2 222.3 221.8 023 50.1 13.8 25.0 00001001 Status read in 1 tries Supported UPS detected with megatec protocol send: Connection timed out blazer_command: Connection timed out blazer_rating: short reply Rating read 1 failed send: Timer expired blazer_command: Timer expired blazer_rating: short reply Rating read 2 failed send: Timer expired blazer_command: Timer expired blazer_rating: short reply Rating read 3 failed Rating information unavailable send: Timer expired blazer_command: Timer expired blazer_vendor: short reply Vendor information read 1 failed send: Timer expired blazer_command: Timer expired blazer_vendor: short reply Vendor information read 2 failed send: Timer expired blazer_command: Timer expired blazer_vendor: short reply Vendor information read 3 failed Vendor information unavailable send: Timer expired blazer_command: Timer expired blazer_status: short reply Communications with UPS lost: status read failed! dstate_init: sock /var/run/nut//blazer_usb-ippon open on fd 5 send: Timer expired blazer_command: Timer expired blazer_status: short reply Communications with UPS lost: status read failed! send: Timer expired blazer_command: Timer expired blazer_status: short reply Communications with UPS lost: status read failed! send: Timer expired blazer_command: Timer expired blazer_status: short reply send: Timer expired blazer_command: Timer expired blazer_status: short reply send: Timer expired blazer_command: Timer expired blazer_status: short reply send: Timer expired blazer_command: Timer expired blazer_status: short reply send: Timer expired blazer_command: Timer expired blazer_status: short reply ...etc In dmesg: [1460980.352806] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 [1460980.354799] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -62 [1460980.357797] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -62 [1460980.360799] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -62 [1460980.363811] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -62 ...etc -- With respect, Roman _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
