2009/9/11 Rainer Fuegenstein <[email protected]> > Arnaud Quette wrote: > > Interesting to know. have you informed them that they would get support >> for mostly all OSs except windows (but they already support it)? >> > yes, of course I did, but didn't get a reply to this part of my email. > the guy I had contact with originally was on vacation, I'll contact him > again, maybe he is more responsive than his colleague.
ok, don't hesitate to send update. > > Now since you came with the first NUT supported SCD, I've made a src.rpm >> for you: >> http://opensource.mgeops.com/stable/sources/nut-2.4.1-8.1.src.rpm >> > > big tnx. rpmbuild works with this one! the one that I used had so many > dependencies to other stuff like powerman etc. I managed to resolve most > of these dependencies, but gave up later. > > there's a slight problem with the rpm %pre scripts when running rpm -i > on the solar server: > > [r...@helios tmp]# rpm -i nut-2.4.1-8.1.i386.rpm > nut-client-2.4.1-8.1.i386.rpm > usermod: invalid numeric argument 'dialout' > error: %pre(nut-client-2.4.1-8.1.i386) scriptlet failed, exit status 3 > error: install: %pre scriptlet failed (2), skipping nut-client-2.4.1-8.1 > usermod: invalid numeric argument 'dialout' > error: %pre(nut-2.4.1-8.1.i386) scriptlet failed, exit status 3 > error: install: %pre scriptlet failed (2), skipping nut-2.4.1-8.1 > > I solved this by creating the group "dialout". > > right > and finally, here it is: > > [r...@helios ups]# upsc ivtscd > battery.current: -1.9 > battery.current.maximum: 2.2 > battery.current.minimum: -2.4 > battery.temperature: 16 > battery.voltage: 12.10 > battery.voltage.maximum: 14.02 > battery.voltage.minimum: 11.84 > device.mfr: IVT > device.model: Solar Controller Device > device.type: scd > driver.name: ivtscd > driver.parameter.pollinterval: 2 > driver.parameter.port: /dev/ttyS0 > driver.version: 2.4.1 > driver.version.internal: 0.02 > ups.status: OB > > the value of the current is off by about -1A, which also pulls the voltage > down by about 0,5V or so. > > is that expected? remember that I've not followed the initial thread, nor had time to do so... Arjen may have more to say about that. hope that helps initially; I'll now dig deeper into the nuts configuration. > happy to see the first NUT SCD working ;-) cheers Arnaud -- Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/
_______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
