Hi Rich, > During the last month, I've been integrating a Powerware 5115 into an > embedded system by writing a custom NUT daemon. This work has gone quite > well and NUT has been very helpful, but it sure would be nice to have some > additional instcmds for the 5115. > Yes the driver can have some more commands like beeper on/off and some more test commands. Also some settings command is possible. But I have not got the time to make any enhancements to the driver lately.
> The bcmxcp driver comments mention "manuals for the BCM/XCP". I'm > wondering if I could get a copy of those so that I might explore enhancing > the bcmxcp drivers to support more instcmds. Eaton has released this to the NUT project, so you have them here. http://www.networkupstools.org/protocols/eaton/ It is the X-format and xcp document for the 5115. By running the driver with debug /path/to/bcmxcp -DD -a <ups> -u root You get some info about the different block length. If you come up with something, I would be glad to put it into the driver. One thing to keep in mind, is that not all ups'es running the bcmxcp handle all commands so well. Regards /Kjell _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
