Hi Guys, I have question,
If you changed liebert source file name (liebertgxt2 -> liebert-esp2) then the driver name will be liebert-esp2 too or don't ? Because now the source filename is liebert-esp2 and driver name liebertgxt2, is it right? Thanks. Spiros patch: I will test it and send my output and my experience. 2010/4/21 Spiros Ioannou <siv...@gmail.com> > Additional info to previous post. Sorry for the big patch but I'm really > trying to find time between 3 jobs with the economic crisis here :-) > > > Today's patch includes: > -support for 1 & 3-phase input & output (and all combinations) > -support for most input & output & bypass & nominal variables (current, > power (watt+VA), voltage, frequency) > > Other new variables: > -ups.type detection (offline, line-interactive, online) > -current crest factor detection (3-phase) > -battery.runtime.low detection > -ups.delay.start detection (yes, I have it in 900 seconds) > > Values were also verified with their snmp equivalents. > > Best Regards, > -Spiros > > > On Wed, Apr 21, 2010 at 5:01 PM, Spiros Ioannou <siv...@gmail.com> wrote: > >> Attached. I also attach sample output from upsc OL & OB. >> I only tested it with 3-phase in/3-phase out ups. >> Thanks, >> -Spiros >> >> > _______________________________________________ > Nut-upsdev mailing list > Nut-upsdev@lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev > -- Best Regards, Robert
_______________________________________________ Nut-upsdev mailing list Nut-upsdev@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
