I have a CyberPower 1500AVR LCD connected by USB to an up-to-date Debian Testing box running nut 2.4.3.
/etc/nut/ups.conf contains the following information:
[myups]
driver = usbhid-ups
port = auto
When I run upsdrvctl start I receive the following output:
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Generic HID driver 0.34 (2.4.3)
USB communication driver 0.31
Can't claim USB device [0764:0501]: could not detach kernel driver from
interface 0: Operation not permitted
Driver failed to start (exit status=1)
Is this because the CyberPower 1500AVR is not supported by the usbhid-ups
driver or is there something else misconfigured on my system?
Soren
--
Soren Stoutner
Small Business Tech Solutions
623-262-6169
so...@sbtechsolutions.biz
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Nut-upsdev mailing list Nut-upsdev@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
