I have tried blazer_usb without success. But thank you anyway. Best regards, Adam
Dne St 13. října 2010 10:00:01 Arjen de Korte napsal(a): > Citeren Adam Sádovský <[email protected]>: > > have some of you tried sweex UPS 1500VA > > (http://www.sweex.com/en/assortiment/power-security/power-protection/PP22 > > 0). It is not listed in hardware compatibility list. > > Which one? Sweex is (in)famous for changing the internals of their > devices, without changing the part numbers. > > > As I can see, sweex can be problematic with drivers, but it is not > > possible to change this UPS to other model now. > > Unless it works with the 'blazer_usb' driver, you're most likely out of > luck. > > > It is connected by USB and lsusb says only: > > Bus 002 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial > > The above is just a generic USB to serial converter. What we really > need is the underlying serial protocol that is used. I very much doubt > that Sweex will be able/willing to tell which is used. You could try > to reverse engineer the protocol by snooping the communication on the > USB port between the (bundled) Windows driver and the UPS. Search the > archives for tips on how to do this. > > Best regards, Arjen > > PS In the end it is probably a lot easier to ditch this device and > buy something that is supported out of the box. _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
