Hello,
i try to setup NUT service to read/control my UPS but without success.
Problem is when i try to start "/usr/local/ups/bin/upsdrvctl -DDDD -u
root start" i got:
/Network UPS Tools - UPS driver controller 2.6.2/
/ 0.000000/
/If you're not a NUT core developer, chances are that you're
told to enable debugging/
/to see why a driver isn't working for you. We're sorry for the
confusion, but this is/
/the 'upsdrvctl' wrapper, not the driver you're interested in./
/Below you'll find one or more lines starting with 'exec:'
followed by an absolute/
/path to the driver binary and some command line option. This is
what the driver/
/starts and you need to copy and paste that line and append the
debug flags to that/
/line (less the 'exec:' prefix)./
/ 0.000348 Starting UPS: mustek/
/ 0.000489 exec: /usr/local/ups/bin/blazer_ser -a mustek
-u root/
/Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.6.2)/
/Unable to open auto: No such file or directory/
/Things to try:/
/ - Check 'port=' in ups.conf/
/ - Check owner/permissions of all parts of path/
/Fatal error: unusable configuration/
/ 0.003411 Driver failed to start (exit status=1)
/
//My "/usr/local/ups/etc/ups.conf" contain:
user = root
[mustek]
driver = blazer_ser
port = auto
UPS is connected over USB and log from "message" show next on connect:
hiddev97: USB HID v1.00 Device [Cypress Semiconductor USB to
Serial] on usb-0000:00:1a.0-1
Can i get some help please? :)
thank you.
_______________________________________________
Nut-upsdev mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
