Sorry about the delay. upsrw:
[battery.charge.low] Remaining battery level when UPS switches to LB (percent) Type: STRING Value: 10 [battery.runtime.low] Remaining battery runtime when UPS switches to LB (seconds) Type: STRING Value: 300 [input.transfer.high] High voltage transfer point (V) Type: STRING Value: 140 [input.transfer.low] Low voltage transfer point (V) Type: STRING Value: 90 [ups.delay.shutdown] Interval to wait after shutdown with delay command (seconds) Type: STRING Value: 20 [ups.delay.start] Interval to wait before (re)starting the load (seconds) Type: STRING Value: 30 --------------- upscmd: Instant commands supported on UPS [ssups]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use beeper.disable or beeper.mute) beeper.on - Obsolete (use beeper.enable) load.off - Turn off the load immediately load.off.delay - Turn off the load with a delay (seconds) load.on - Turn on the load immediately load.on.delay - Turn on the load with a delay (seconds) shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop - Stop a shutdown in progress test.battery.start.deep - Start a deep battery test test.battery.start.quick - Start a quick battery test test.battery.stop - Stop the battery test --Brian > -----Original Message----- > From: Arnaud Quette [mailto:[email protected]] > Sent: Monday, February 27, 2012 6:48 AM > To: McCann, Brian > Cc: [email protected] > Subject: Re: [Nut-upsdev] [HCL] CyberPower OR700 supported by usbhid-ups > > Hi Brian, > > 2012/2/22 McCann, Brian <[email protected]>: > > CyberPower OR700LCDRM1U > (http://www.cyberpowersystems.com/products/ups-systems/smart-app- > ups/rackmount-lcd/OR700LCDRM1U.html) > > upsc output: > > > > battery.charge: 100 > > battery.charge.low: 10 > > battery.charge.warning: 20 > > battery.mfr.date: CPS > > battery.runtime: 6000 > > battery.runtime.low: 300 > > battery.type: PbAcid > > battery.voltage: 14.5 > > battery.voltage.nominal: 12 > > device.mfr: CPS > > device.model: UPS OR700 > > device.type: ups > > driver.name: usbhid-ups > > driver.parameter.pollfreq: 30 > > driver.parameter.pollinterval: 2 > > driver.parameter.port: auto > > driver.version: 2.6.1 > > driver.version.data: CyberPower HID 0.3 > > driver.version.internal: 0.35 > > input.transfer.high: 140 > > input.transfer.low: 90 > > input.voltage: 119.0 > > input.voltage.nominal: 120 > > output.voltage: 119.0 > > ups.beeper.status: enabled > > ups.delay.shutdown: 20 > > ups.delay.start: 30 > > ups.load: 0 > > ups.mfr: CPS > > ups.model: UPS OR700 > > ups.productid: 0601 > > ups.realpower.nominal: 400 > > ups.status: OL > > ups.test.result: Done and passed > > ups.timer.shutdown: -60 > > ups.timer.start: -60 > > ups.vendorid: 0764 > > > > System shutdown cleanly. Was tested on FreeBSD 8.1 > > thanks for your report. > I've just committed (r3468) an entry in the HCL. > > for the sake of completion, could you also send us upsrw and upscmd > outputs? > > cheers, > Arnaud > -- > Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com > Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ > Debian Developer - http://www.debian.org > Free Software Developer - http://arnaud.quette.free.fr/ _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
