From: "Greg A. Woods" <[email protected]> --- docs/man/apcsmart.txt | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/docs/man/apcsmart.txt b/docs/man/apcsmart.txt index 52cf0b4..77b2c29 100644 --- a/docs/man/apcsmart.txt +++ b/docs/man/apcsmart.txt @@ -70,13 +70,16 @@ This driver expects to see a 940-0024C cable or a clone by default. You can switch to the 940-0095B dual-mode cable support with the \'cable=' definition described below. -If your 940-0024C cable is broken or missing, use this diagram to build +If your 940-xx24X cable is broken or missing, use this diagram to build a clone: http://www.networkupstools.org/cables.html#_940_0024c_clone -NOTE: It was reported, that the 940-0024E cable uses the same wiring as the -940-0024C one. +NOTE: The "xx" is either "00" for a short cable, or the number of feet +of a longer cable. The "X" is a letter representing the minor revision +of the physical cable and its connectors ("C" and "E" are commonly found +revisions). All minor revisions should use the same pin-outs and +wiring. You can specify alternate cable in linkman:ups.conf[5]: -- 1.7.9.2 _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
