(forwarding msg because of attachment too big... so compressed) @Ivan: as told previously, please subscribe to the mailing prior to sending any further mail. Also, whenever you send attachment, please compress these to fit in below the 40Kb limit...
Now that Riello has jumped officially on the mailing list, you should probably get an answer from them quickly... -- Arnaud ---------- Message transféré ---------- From: Ivan Kuznetsov <[email protected]> To: [email protected] Cc: Date: Sat, 05 May 2012 17:27:28 +0400 Subject: Re: Riello UPs implementation for NUT software Hello 1. snmp-ups driver from nut 2.6.3 takes very long time to startup. The init script shows the service as failed at startup, but the driver is still starting. After a time upsd successfully connects to the driver and works normally As I can see the driver polls a number of SNMP variables the snmp-adapter does not respond for. E.g. 1.3.6.1.2.1.33.1.6.3.8 (upsAlarmOutputOverload) 1.3.6.1.2.1.33.1.7.1.0 (upsTestId) 1.3.6.1.2.1.33.1.7.3.0 (upsTestResultsSummary) Each of this poll results in 6 sec timeout, so the complete driver startup takes 60-65 sec, more than standard timeout (45 sec) for upsdrvctl 2. Each UPS poll cycle takes ~12 sec to complete. Slow SNMP-adapter? It seems that it become much slower when there are more than one PC polls them Log of `snmp-ups -a mdt40 -u nut -DD` is attached. I turn off the UPS input at about 300s of logging and turn it on at ~390s 24.04.2012 17:55, Ivan Kuznetsov пишет: Hello We have an Riello MDT40 UPS at our data room. We currently monitoring the UPS via Netman 102 plus Web/SNMP card using RFC1628 mibs. UPS status is mostly reported correctly but there are some issues with values reported. E.g. output power is not in Watts, input power is constantly 0, battery charge current varies upto unreal values. Alsow we find that sometimes the card becomes unresponsible, probably hangs. We need to reset the card to return access to it Some time ago we have update card firmware to v1.15 and some of mistakes went avay. May be we can cooperate to make card firmware better? Of cource we can do some tests with both NUT and hardware we have Regards, Ivan Kuznetsov System Administrator of SOLVO ltd http://www.solvo.ru Regards, Ivan Kuznetsov System Administrator SOLVO ltd
mdt40.log.bz2
Description: BZip2 compressed data
_______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
