2012/3/9 Greg A. Woods <[email protected]>: > From: "Greg A. Woods" <[email protected]> > > --- > docs/man/apcsmart.txt | 9 ++++++--- > 1 file changed, 6 insertions(+), 3 deletions(-) > > diff --git a/docs/man/apcsmart.txt b/docs/man/apcsmart.txt > index 52cf0b4..77b2c29 100644 > --- a/docs/man/apcsmart.txt > +++ b/docs/man/apcsmart.txt > @@ -70,13 +70,16 @@ This driver expects to see a 940-0024C cable or a clone > by default. You > can switch to the 940-0095B dual-mode cable support with the \'cable=' > definition described below. > > -If your 940-0024C cable is broken or missing, use this diagram to build > +If your 940-xx24X cable is broken or missing, use this diagram to build > a clone: > > http://www.networkupstools.org/cables.html#_940_0024c_clone > > -NOTE: It was reported, that the 940-0024E cable uses the same wiring as the > -940-0024C one. > +NOTE: The "xx" is either "00" for a short cable, or the number of feet > +of a longer cable. The "X" is a letter representing the minor revision > +of the physical cable and its connectors ("C" and "E" are commonly found > +revisions). All minor revisions should use the same pin-outs and > +wiring. > > You can specify alternate cable in linkman:ups.conf[5]:
applied to trunk, r3569. thanks. Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/ _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
