Bonjour Pascal 2012/7/13 Pascal MIRALLES <[email protected]>
> UNITEK Alpha650ipF and Alpha650ipE > Build NUT v2.6.4 from sources > http://www.networkupstools.org/source/2.6/nut-2.6.4.tar.gz > System: RedHat Linux RHEL4 > Kernel: 2.6.9-42.0.10.EL > > (upsc) command output : > battery.charge: 100 > battery.voltage: 14.30 > battery.voltage.high: 13.00 > battery.voltage.low: 10.40 > battery.voltage.nominal: 12.0 > device.mfr: UNITEK > device.model: Alph650ipF > device.type: ups > driver.name: blazer_usb > driver.parameter.pollinterval: 2 > driver.parameter.port: auto > driver.parameter.productid: 0001 > driver.parameter.vendorid: 0f03 > driver.version: 2.6.4 > driver.version.internal: 0.08 > input.current.nominal: 2.8 > input.frequency: 60.0 > input.frequency.nominal: 50 > input.voltage: 121.3 > input.voltage.fault: 121.3 > input.voltage.nominal: 230 > output.voltage: 202.0 > ups.beeper.status: disabled > ups.delay.shutdown: 30 > ups.delay.start: 180 > ups.firmware: A0 > ups.load: 33 > ups.mfr: UNITEK > ups.model: Alph650ipF > ups.productid: 0001 > ups.status: OL > ups.temperature: 32.0 > ups.type: offline / line interactive > ups.vendorid: 0f03 > > (upscmd -l) command output : > Instant commands supported on UPS [unitek650ipF]: > > beeper.toggle - Toggle the UPS beeper > load.off - Turn off the load immediately > load.on - Turn on the load immediately > shutdown.return - Turn off the load and return when power is back > shutdown.stayoff - Turn off the load and remain off > shutdown.stop - Stop a shutdown in progress > test.battery.start - Start a battery test > test.battery.start.deep - Start a deep battery test > test.battery.start.quick - Start a quick battery test > test.battery.stop - Stop the battery test > > I haven't tested shutdown command yet but the device is detected. > please test the shutdown, since it's the very basic feature that must work! you may want to use the documentation to drive you: http://www.networkupstools.org/docs/user-manual.chunked/ar01s06.html#Testing_shutdowns I'll wait for your feedback on the device shutdown before committing entries in the HCL. Thanks for your report. cheers, Arno -- Linux / Unix / Opensource Engineering Expert - Eaton - http://opensource.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.fr
_______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
