torsdagen den 6 juni 2013 14.58.53 skrev Jim Seymour: > Hi There, Hi Jim,
> We have this rather large-ish floor-standing Best Axxium Pro, Model > Series 0650. > That would be the tower model. > I tried using both the "bestups" and "blazer_ser" drivers with it, but > no go. So before I go any further: *Should* one of these work with it > and, if not, do I have any options? (E.g.: Modify a current driver, > resuscitate one that was started and abandoned, etc.? I can code.) > It may talk bcmxcp protocol. If it say advanced binary protocol for the communication, it may be the bcmxcp. Some Sola and Best ups'es was using this protocol. > My test platform was nut 2.4.3-1ubuntu3.2 under Ubuntu 10.04 LTS on a > laptop. I have confirmed the serial port works. I used a 9-pin null > modem adapter, as both the laptop and Axxium Pro were transmitting on > pin 3. Yes it should use only rx and tx line. 9600,8,n,1. No handshake, as the protocol is binary and use a start sequence and checksum. Regards //Kjell _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
