Hello again! Sorry for not being able to test this before.
Ulisses, please apply the patch to fix typo in my e-mail address. I've compiled it against nut-2.6.5 about 10 hours ago. It was everything fine until now. I'm seeing CHRG but the ups led wasn't blinking at all. Vendor software was strangely showing charging also. I am assuming this is expected behavior. I've set the following parameters according to my ups datasheet ( http://www.sms.com.br/aplicacoes/documentos/01sql07/inc/arquivo_hd_familia.asp?familiaID=N037) and estimated runtime is good. I'm waiting feedback (if any) then I will relocate this ups to a dedicated test pc and test how the driver behaves while running on battery and its responses to commands. After this, I will compare against vendor software and post final results here. I am also looking for any advice on test methodology. Rodrigo [smsbrasil] driver = smsbrasil port = /dev/ttyUSB0 desc = "smsbr" default.ups.power = 1400 default.ups.efficiency = 85 default.battery.capacity = 14 root@home:~# upsc smsbrasil battery.capacity: 14 battery.charge: 100.0 battery.charge.low: 30 battery.charge.restart: 25 battery.charge.warning: 40 battery.runtime: 1440 battery.voltage.nominal: 012 device.mfr: SMS Brasil device.model: Monophase: :NET4+ 3.0 device.type: ups driver.name: smsbrasil driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyUSB0 driver.version: 2.6.5 driver.version.internal: 0.02 input.frequency: 60.0 input.frequency.nominal: 60 input.voltage: 230.0 input.voltage.nominal: 220 output.frequency: 60.0 output.voltage: 114.0 ups.beeper.status: enabled ups.efficiency: 85 ups.load: 25.0 ups.mfr: SMS Brasil ups.model: Monophase: :NET4+ 3.0 ups.power: 1400 ups.productid: 5500 ups.status: OL BOOST BYPASS CHRG ups.temperature: 34.0 ups.vendorid: 04b4
fix-typo.patch
Description: Binary data
_______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
