Tripp Lite SMART1300LCDT # upsc ups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 30 battery.runtime: 2951 battery.type: PbAC battery.voltage: 0.0 battery.voltage.nominal: 24.0 device.mfr: Tripp Lite device.model: TRIPP LITE UPS device.serial: 2250AVLSM872100251 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 3016 driver.version: 2.6.4 driver.version.data: TrippLite HID 0.8 driver.version.internal: 0.37 input.frequency: 5990.0 input.transfer.high: 150.0 input.transfer.low: 92.0 input.voltage: 0.0 input.voltage.nominal: 120 output.current: 100.00 output.frequency: 5990.0 output.frequency.nominal: 60 output.voltage: 0.0 output.voltage.nominal: 120 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.load: 14 ups.mfr: Tripp Lite ups.model: TRIPP LITE UPS ups.power: 108.0 ups.power.nominal: 1300 ups.productid: 3016 ups.serial: 2250AVLSM872100251 ups.status: OL ups.timer.reboot: 65535 ups.timer.shutdown: 65535 ups.timer.start: 65535 ups.vendorid: 09ae ups.watchdog.status: 0
# upsrw ups [battery.charge.low] Remaining battery level when UPS switches to LB (percent) Type: STRING Value: 10 [input.transfer.high] High voltage transfer point (V) Type: STRING Value: 150.0 [input.transfer.low] Low voltage transfer point (V) Type: STRING Value: 92.0 [ups.delay.shutdown] Interval to wait after shutdown with delay command (seconds) Type: STRING Value: 20 [ups.delay.start] Interval to wait before (re)starting the load (seconds) Type: STRING Value: 30 # upscmd -l ups Instant commands supported on UPS [ups]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use beeper.disable or beeper.mute) beeper.on - Obsolete (use beeper.enable) load.off - Turn off the load immediately load.off.delay - Turn off the load with a delay (seconds) load.on - Turn on the load immediately load.on.delay - Turn on the load with a delay (seconds) reset.watchdog - Reset watchdog timer shutdown.reboot - Shut down the load briefly while rebooting the UPS shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop - Stop a shutdown in progress Shutdown sequence testing results: PASSED Device link: http://www.tripplite.com/en/products/model.cfm?txtModelID=5326 Additional Notes: OS Debian 7.1 # lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 09ae:3016 Tripp Lite Had to add the following entry to /lib/udev/rules.d/52-nut-usbups.rules: ATTR{idVendor}=="09ae", ATTR{idProduct}=="3016", MODE="664", GROUP="nut" Had to force 'productid' in /etc/nut/ups.conf: [ups] driver = usbhid-ups port = auto productid= 3016 _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
