Hi,
here is my ups.conf
[art]
driver = blazer_ser
protocol = megatec
port = /dev/ttyS0
desc = "Artronic art 1000 bl"
default.battery.voltage.high = 13.5
default.battery.voltage.low = 11.5
runtimecal = 150,100,300,50
idleload = 10
chargetime = 28800
norating
novendor
I needed to test the runtime, chargetime,voltage.high and low and put them
manually.The information is not so full like in my apc ups working with
usbhid-ups for example.
Best regards,Miroslav
On Wednesday, February 25, 2015 5:17 AM, Charles Lepple
<[email protected]> wrote:
On Feb 10, 2015, at 5:24 PM, Miroslav Todorov <[email protected]> wrote:
> Hi Artronic art 1000 bl is supported partially by blazer_ser:
>
When you say "partially supported", what is not supported? Are any of the
values incorrect?
--
Charles Lepple
clepple@gmail
_______________________________________________
Nut-upsdev mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
