Kevin, As Matthijs noted, pfSense uses a circular log file. The default size is ~500KB, which can be a bit small. You can increase the log file size by changing the “Log file size” parameter on the Log management page. Look for the wrench symbol on the system log page (Status / System Logs / System / General). Note that you have to clear the log after changing its size. FWIW, I have mine set to 10MB.
If you want complete information on UPS discovery, the best time to capture complete information about the UPS would be after a reboot. If you are not able to reboot, then restarting the UPS service (Status / Services) will get suffice to get all the messages originating from NUT itself. It will not include the kernel discovery messages, but I don’t see a need for that here. Denny > On Aug 15, 2018, at 00:00, Kevin Mychal Ong <[email protected]> wrote: > > Denny, > > The first three commands had outputs but the "clog /var/log/system.log | grep > -i ups” didn't output any. Did I do anything wrong? This is the output > without the grep: > > can't allocate llinfo for <Public IP> on igb0 > Aug 14 18:14:59 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > Aug 14 18:15:00 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > Aug 14 18:15:26 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > Aug 14 18:15:27 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > Aug 14 18:15:53 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > Aug 14 18:15:54 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > Aug 14 18:16:20 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > Aug 14 18:16:21 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > Aug 14 18:16:47 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > Aug 14 18:16:48 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > Aug 14 18:17:14 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > Aug 14 18:17:15 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > Aug 14 18:17:41 pfSense kernel: arpresolve: can't allocate llinfo for <Public > IP> on igb0 > > Thank you. > > Regards, > > Kevin Mychal M. Ong > Infrastructure Engineer, Microsoft Technology Services - Messaging > Global Infrastructure Operations > > Ingram Micro Inc. > 4F Three World Square, 22 Upper McKinley Hill, Fort Bonifacio > Taguig City, Philippines 1634 > > Direct +1-716-633-3600 ext. 33996 > Mobile +63-917-511-0251 > > : [email protected] _______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
