Hi folks,
I have an APC Back-UPS XS 1400U which is reporting the wrong input and output voltages. I am in the UK where our nominal voltage is 240 - not 110 :) If I connect with parachute via USB it reports correctly. Is there a config I can update to tell it what it should be reporting? Some wrong conversion? TIA Some details: pi@rpiserver01:~ $ upsc ups Init SSL without certificate database battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25 battery.mfr.date: 2015/05/10 battery.runtime: 14548 battery.runtime.low: 120 battery.type: PbAc battery.voltage: 27.3 battery.voltage.nominal: 24.0 device.mfr: American Power Conversion device.model: Back-UPS XS 1400U device.serial: 3B1519X22971 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.synchronous: no driver.version: 2.7.4 driver.version.data: APC HID 0.96 driver.version.internal: 0.41 input.sensitivity: medium input.transfer.high: 280 input.transfer.low: 155 input.transfer.reason: input voltage out of range input.voltage: 110.0 input.voltage.nominal: 102 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.firmware: 926.T1 .I ups.firmware.aux: T1 ups.load: 0 ups.mfr: American Power Conversion ups.mfr.date: 2015/05/10 ups.model: Back-UPS XS 1400U ups.productid: 0002 ups.realpower.nominal: 700 ups.serial: 3B1519X22971 ups.status: OL ups.test.result: No test initiated ups.timer.reboot: 0 ups.timer.shutdown: -1 ups.vendorid: 051d
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
