I installed the NUT under the latest Ubuntu Mate for Raspberry. The
driver immediately earned with my UPS (Powercom SPD-850U). But my
happiness was not long. After the first restart of Raspberry, the NUT
did not start. It is treated by reconnecting the USB connector.
Reconnection has to be performed after each reboot of Raspberry.
The USB permissions for the "nut" group and priority 62
(62-nut-usbups.rules) are set correctly. NUT works without problems with
this UPS on the desktop Debian.
v@v-desktop:~/Рабочий стол$ lsusb
Bus 001 Device 004: ID 0d9f:0004 Powercom Co., Ltd
Bus 001 Device 005: ID 0424:7800 Standard Microsystems Corp.
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
v@v-desktop:~/Рабочий стол$ sudo /lib/nut/usbhid-ups -DD -a spider
Network UPS Tools - Generic HID driver 0.41 (2.7.4)
USB communication driver 0.33
0.000000 debug level is '2'
0.002016 upsdrv_initups...
.......
0.002883 Checking device (0D9F/0004) (001/004) 0.004499 -
VendorID: 0d9f
0.004538 - ProductID: 0004
0.004566 - Manufacturer: unknown
0.004585 - Product: unknown
0.004604 - Serial Number: unknown
0.004622 - Bus: 001
0.004641 - Device release number: 0002
0.004660 Trying to match device
0.004690 Device matches
0.005416 Unable to get HID descriptor (error sending control
message: Broken pipe)
0.005553 HID descriptor length 996
0.007546 Unable to get Report descriptor: Broken pipe
-
С уважением
Зайчиков В А
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
