Hello all and thanks. I read here
<https://mn3m.info/posts/configure-ups-monitor-using-nut-on-debian/>
while searching around for my issue's resolution. In this I see that
this nut driver is creating and using an entry in /dev (in this case
ttyS0). So I "ll tty*" and see nothing with nut. Since this is a USB
UPS, I suppose I should be looking for something in /dev/ttyUSB*. I have
a single entry there ttyUSB0 but that is created and used by me for
running Heyu for my home automation system.
Any chance I am onto something here?
Thanks
On 7/8/2019 1:16 PM, Roger Price wrote:
On Mon, 8 Jul 2019, David White wrote:
However I am a bit stumped on monitoring. What I want is to execute a
script when the UPS goes on battery. To do this, I think I have to
have the nut-client running. Is this correct? If so I seem to have
some troulbe.
You need to have nut-monitor.service running. The command
systemctl list-unit-files | grep nut should report
nut-driver.service static
nut-monitor.service enabled
nut-server.service enabled
plus any "delayed UPS shutdown" service you might use. nut-driver is
started automatically by systemd whenever nut-server starts.
The command ps -elf | grep -E "nut|ups" should show
1 S upsd 3096 1 ... /usr/lib/ups/driver/...
1 S upsd 3100 1 ... /usr/sbin/upsd
1 S root 3104 1 ... /usr/sbin/upsmon
5 S upsd 3105 3104 ... /usr/sbin/upsmon
Roger
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
