Hello,
I installed NUT on raspberry pi as a NUT-Server. It works fine so far with a Cyberpower OR600ELCDRM1U (used driver: usbhid-ups). The Pi recognizes power loss and shuts down itself and the ups as it should. Problem: The UPS comes up immediately after shutting down. This is a big issue because there is no power, the server (NUT-Slave) begins powering up and the battery will drain within one minute. The UPS should stay off until power comes back on line. Can you help me with this? Thanks a lot!
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
