I'm playing with a new CentOS 8 with a cyperpower OR500 (a smaller sibling to the OR700) plugged in via USB.
GNOME sees the UPS... but NUT does not (even if I shut down gnome).
[root@delp ups]# upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication driver 0.33 No matching HID UPS found Driver failed to start (exit status=1)
Annoyingly, the USB listeing is for a PR1500 even though it really IS an OR500
[root@delp ups]# lsusb -d 0764:0601 -v Bus 006 Device 002: ID 0764:0601 Cyber Power System, Inc. PR1500LCDRT2U UPS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0764 Cyber Power System, Inc. idProduct 0x0601 PR1500LCDRT2U UPS bcdDevice 2.00 iManufacturer 3 CPS iProduct 1 UPS OR500 iSerial 0 bNumConfigurations 1
[OR500] driver = usbhid-ups port = auto desc = "CyberPower OR500 UPS" # vendorid = 0764 <-- this doesn't help in/out of config
What else can I provide to help debug this? And -- can gnome and NUT access the UPS at the same time or do I need to disable Gnome somehow? Thanks, -Ben _______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
