On Thu, Sep 24, 2020 at 06:51:23PM +0300, Manuel Wolfshant wrote: > On 9/21/20 9:47 PM, Lionel Élie Mamane wrote:
>> We have a HP R/T 3000 G4 UPS; according to the data returned by the >> usbhid-ups driver, it seems to be a "badge engineered" Eaton 5PX >> UPS LI R 3000. >> We have a stubborn "Replace Battery" alarm that stays (...): >> The panel doesn't show any battery-related alarm. >> Anybody has a clue how I should proceed or debug the issue? > try to run the driver in debug mode so that we can see what data is actually > sent by the UPS > #usbhid-ups -DDDD -u root -a $YourUpsName > where $YourUpsName is the one you used in /etc/ups/ups.conf > After a few seconds the output will start to repeat so ctrl-c and examine > whatever was collected. and maybe zip it and send it to the list. I attach the output. I looked for "replace" and "battery" in there, and nothing obviously understandable to me in there; that is too raw data, not sure what it means. If anybody can make sense of it, thanks in advance! Lionel
usbhid-ups_output.bz2
Description: Binary data
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
