upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication driver 0.33
Fatal error: 'maxretry' is not a valid variable name for this driver. Look in the man page or call this driver with -h for a list of valid variable names and flags. ||/ Name Version Architecture Description +++-==============-============-============-================================= ii nut-server 2.7.4-8 armhf network UPS tools - core system The UPS is a CyberPower 1500VAAVR On Sat, Oct 31, 2020 at 11:43 AM Charles Lepple <[email protected]> wrote: > On Oct 30, 2020, at 3:00 PM, bobby <[email protected]> wrote: > > > > I installed NUT on my raspberry pi. I've been following this tutorial: > https://melgrubb.com/2016/12/11/rphs-v2-ups/. I am trying to use NUT to > monitor my cyberpower UPS. I seem to have this problem though: upsc > cyberpower@localhost Init SSL without certificate database Error: Driver > not connected > > Doing a status check on nut-server, I see the following: Can't connect > to UPS [cyberpower] (usbhid-ups-cyberpower): No such file or directory > > Just before starting nut-server (which needs to connect to a running > driver), the article says to run "sudo upsdrvctl start". What did that > return? > > Also, for the benefit of others who come across this thread, please > include a bit more detail on your setup. Since there's a good chance you're > running Raspbian, you can probably get the NUT version with `dpkg -l > nut-server`. > > > _______________________________________________ > > Nut-upsuser mailing list > > [email protected] > > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser > >
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
