You can add a udev script to restart NUT when the UPS is plugged in https://wiki.debian.org/udev
From: Nut-upsuser <[email protected]> On Behalf Of Maxence Rioblanc Sent: 16 November 2021 11:55 To: [email protected] Subject: [Nut-upsuser] UPS hotplug Hello, I'm using nut for few days and found it working perfectly fine in most conditions. However, there is one behavior I am not able to handle correctly: When I boot my computer (I am in a mode=standalone configuration) while my UPS is not connected and that I plug it (using USB cable) later, the driver doesn't mount automatically, and I am not able to enable communication with my UPS. I need to restart nut-server.service to get communication established. Is there any way to make this hot plug works? My configuration: * Debian 11 * NUT 2.7.4-13 installed from apt-get * UPS: ECUS MRT_2_1000 running fine with blazer_usb driver * Regards, Maxence
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
