# upsdrvctl start
Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - APC Smart protocol driver 3.1 (2.7.4)
APC command table version 3.1
[d] unrecognized
I see this error every time I start NUT, but I can't find any
documentation about it.
I assume it's from this code in apcsmart.c:
static inline void warn_cv(unsigned char cmd, const char *tag, const
char *name)
{
if (tag && name)
upslogx(LOG_WARNING, "%s [%s] - %s invalid", name,
prtchr((char)cmd), tag);
else
upslogx(LOG_WARNING, "[%s] unrecognized",
prtchr((char)cmd));
}
I guess "d" is some kind of command, but that's all I can glean from this.
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
