Hi, I create a script to build a file for the dummy-ups to simulate an UPS from other two in redundant mode for devices that allows monitoring only one UPS.
The diagram: https://imgur.com/a/z4ZUuNw I made some configurations that I put here: https://pastebin.com/yiQ1ju10 Can you look at them and tell me if it can works before I try physically? Just saw an error on upsmon.conf where I put a symbolic IP address for the two UPSes but I must put the name in ups.conf instead. My doubts are in upsmon.conf where I defined a custom script to be called on NOTIFYCMD and I don't know if now the upssched will be called anyway by NUT. I don't know if upssched is needed to power off the UPSes. Then in upsd.conf should I put the static IP other than 127.0.0.1? There is also a dummy.dev file with default values to be sure that the dummy ups can read something even before the start of the script.
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
