Hi Jim,
I have 2 drivers which have launched well connecting 2 APC UPS (both with usbhid-ups)
They have both bus & serial set.
The Eaton is the third one. I have removed serial and bus from the configuration.
driver : usbhid-ups
port = auto
vendorid = 0463
productid = ffff
pollonly
I have highlighted the errors while launching the driver:
0.039057 [D2] Checking device 4 of 10 (214B/7250)
0.039099 [D1] Failed to open device (214B/7250), skipping: Access denied (insufficient permissions)
0.039109 [D2] Checking device 5 of 10 (0463/FFFF)
0.956144 [D1] nut_libusb_open get iManufacturer failed, retrying...
0.956518 [D1] nut_libusb_open get iManufacturer failed, retrying...
0.956836 [D1] nut_libusb_open get iManufacturer failed, retrying...
0.957291 [D1] nut_libusb_open get iProduct failed, retrying...
0.957708 [D1] nut_libusb_open get iProduct failed, retrying...
0.958098 [D1] nut_libusb_open get iProduct failed, retrying...
0.958135 [D2] - VendorID: 0463
0.958184 [D2] - ProductID: ffff
0.958207 [D2] - Manufacturer: unknown
0.958254 [D2] - Product: unknown
0.958274 [D2] - Serial Number: unknown
0.958297 [D2] - Bus: 002
0.958372 [D2] - Device: unknown
0.958391 [D2] - Device release number: 0001
0.958432 [D2] Trying to match device
0.958475 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.958505 [D3] match_function_regex: matching a device...
0.958605 [D2] Device matches
0.958636 [D2] Reading first configuration descriptor
0.958682 [D3] libusb_kernel_driver_active() returned 1 (driver active)
0.958715 [D2] successfully set kernel driver auto-detach flag
0.961730 [D2] Claimed interface 0 successfully
0.961788 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0)
0.962067 [D2] Unable to get HID descriptor (Pipe error)
0.962127 [D3] HID descriptor length (method 1) -1
0.962169 [D3] HID descriptor, method 2: (9 bytes) => 09 21 10 01 21 01 22 e1 01
0.962201 [D3] HID descriptor length (method 2) 481
0.962309 [D2] HID descriptor length 481
0.962697 [D2] Unable to get Report descriptor: Resource temporarily unavailable
…
0.963687 [D2] libusb1: No appropriate HID device found
0.963784 libusb1: Could not open any HID devices: insufficient permissions on everything
0.963810 No matching HID UPS found
Thanks for your help.
Laurent
The "unknown" fields mean the driver did not get that piece of information from libusb. In case of Manufacturer/Product which are unknown in the later post, but known in the first, I suppose you had another driver running, or the kernel still owned it (udev misbehavior, not handing it off after reconnections, etc.) and so exclusive access was not given to the new (currently reporting) process.
The "Device" matching specifically had a problem fixed in the master branch a few months ago. You can try to comment it away from your ups.conf for a quick workaround, and match by remaining fields (assuming their values are correct).
On Thu, Mar 9, 2023 at 7:51 PM Laurent Taieb via Nut-upsuser <[email protected]> wrote:
Thanks Larry,
I tried.
Got the following traces and the driver doesn’t start.
1.036797 [D2] - VendorID: 0463
1.036812 [D2] - ProductID: ffff
1.036826 [D2] - Manufacturer: unknown
1.036840 [D2] - Product: unknown
1.036872 [D2] - Serial Number: unknown
1.036912 [D2] - Bus: 002
1.036942 [D2] - Device: unknown
1.036965 [D2] - Device release number: 0001
1.036980 [D2] Trying to match device
1.037008 [D2] match_function_subdriver (non-SHUT mode): matching a device...
1.037044 [D3] match_function_regex: matching a device...
1.037102 [D2] Device matches
1.037131 [D2] Reading first configuration descriptor
1.037187 [D3] libusb_kernel_driver_active() returned 1 (driver active)
1.037220 [D2] successfully set kernel driver auto-detach flag
1.040994 [D2] Claimed interface 0 successfully
1.041063 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0)
1.041438 [D2] Unable to get HID descriptor (Pipe error)
1.041480 [D3] HID descriptor length (method 1) -1
1.041530 [D3] HID descriptor, method 2: (9 bytes) => 09 21 10 01 21 01 22 e1 01
1.041566 [D3] HID descriptor length (method 2) 481
1.041605 [D2] HID descriptor length 481
1.041926 [D2] Unable to get Report descriptor: Resource temporarily unavailable
Any idea ?
Thanks
Laurent
On Thursday, March 9th, 2023 at 8:34 AM, Dan Langille via Nut-upsuser <[email protected]> wrote:
The UPS has been defined in ups.conf as:
[myups3]
driver : usbhid-ups
port = auto
vendorid = 0463
productid = ffff
desc = "5S"
bus = 002
device = 014
pollonly
I have only:
[ups02]
driver=usbhid-ups
port=auto
I have an Eaton 5P750 connected via USB and agree, a less specific entry in ups.conf works fine for me:
[ups]
driver = usbhid-ups
port = auto
vendorid = 0463
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
