On April 12, 2023 12:34:19 AM GMT+03:00, Steve Bradford via Nut-upsuser <[email protected]> wrote: >I have a Tripp Lite UPS and I have a configuration switch on one load and >the PC plugged into the other load of the UPS is there any way to control >the outlets of the UPS using NUT to allow the load the Switch is one to >turn on before the PC load? I keep playing around with cloner drivers but >they don't seem to be registering in the UPS There are two things that I would try in order to set this up: - snmp - rw variables Regards, wolfy _______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] Controlling Outlets on UPS
Manuel Wolfshant via Nut-upsuser Tue, 11 Apr 2023 15:28:37 -0700
- [Nut-upsuser] Controlling Outlets on UPS Steve Bradford via Nut-upsuser
- Re: [Nut-upsuser] Controlling Outlet... Manuel Wolfshant via Nut-upsuser
- Re: [Nut-upsuser] Controlling Outlet... Jim Klimov via Nut-upsuser
