That It may be right (I don't know), however, where could we confirm whether 3024 is already supported for 2.8.0 or newer? And let's suppose it is. Because current OpenWrt releases are built arround 2.7.4-27, what could I try to backport that (driver mod) to 2.7.4-27?
________________________________ De: Jim Klimov <[email protected]> Enviado: sábado, 6 de mayo de 2023 4:21 p. m. Para: Feliciano Chavez <[email protected]> Cc: Arnaud Quette via Nut-upsuser <[email protected]> Asunto: Re: [Nut-upsuser] NUT support for the new Tripp Lite AVR700U (USB 3024) under OpenWrt? I think 3024 was added after NUT 2.7.4 release. On Thu, May 4, 2023, 18:20 Feliciano Chavez via Nut-upsuser <[email protected]<mailto:[email protected]>> wrote: Dears, I'm trying to connect this new version of the AVR700U to nut - 2.7.4-27 running over OpenWrt 22.03.5, installed from the stable release repositories, for an ath79 USB2.0 gigabit WiFi router. According to the supported list, I thought this UPS was supposed to use the USB 2010 protocol, but I guess that was an old version because now uses the 3024 protocol (perhaps it would be good to add a note for future buyers). root@Router:/# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux 5.10.176 ehci_hcd EHCI Host Controller Bus 002 Device 002: ID 09ae:3024 Tripp Lite AVR700U Bus 002 Device 001: ID 1d6b:0001 Linux 5.10.176 ohci_hcd Generic Platform OHCI controller Under networkupstools at github, I noticed the issue 808, which states this could be (partially) supported by including the vendor id and productid in ups.conf. Therefore, for the OpenWrt use case, I would have to add the following to /etc/config/nut-server: config driver 'tripplite' option driver usbhid-ups option port auto option vendorid 09ae option productid 3024 This avoids the previous 3024 "not supported" error message, root@Router:/# upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication driver 0.33 Using subdriver: TrippLite HID 0.82 but still can't connect to the UPS: root@Router:/# upsc tripplite Error: Driver not connected So I kindly ask you what could we do in this case Note: I haven't seen an udev rules file under the running OpenWrt. _______________________________________________ Nut-upsuser mailing list [email protected]<mailto:[email protected]> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
